9 Tips To Unclog A Bathtub Drain

When you pull the plug after your bath, does the water take a while to drain away? Worse than that, is the water refusing to budge altogether? Have you also noticed strange or unpleasant odors?

These are all signs that your bathtub drain might be blocked. Bathtub drains can get easily clogged. Wastewater contains hair, dirty suds, and other unpleasantries that you can probably well imagine.

So what do you do if you want to remove the blockage? We show you how to unclog a bathroom drain.

1. Remove and clean the strainers and stoppers

Take the strainer and soak it in warm soapy water, preferably overnight. You could also add a small drop of vinegar to act as a caustic to unclog the strainer. If you have stubborn blockages, a toothbrush is an excellent tool for effective cleaning.

You could use another type of brush, but a toothbrush is the ideal size.

Soak the stopper in water and vinegar for about 15 minutes and then lift it out to rub it dry with a cloth.

2. Drain claw

The drain claw, or drain snake as some call it, consists of a long, flexible wire with an auger on one end. The claw is better suited to larger pipes, while the snake prefers narrower outlets. I

Start by inserting the claw into the drain and feed it along the pipe.

When you reach the blockage and feel resistance, twist the drain claw so that the auger bores into the pipe, pushing through the massed debris, breaking it into smaller bits. When you feel the drain claw move more freely, pull it out of the drain.

Next, run the faucet to flush water into the drain. This should wash away the blockage

3. Baking soda and vinegar

Start by pouring a kettle of boiling water down the drain. Next, pour a cup of baking soda into the drain, followed by half a cup of water and half a cup of vinegar.

Cover the drain with the plug and wait about 15 minutes as the solution starts to react. When you hear the fizzing sound, you know the chemical reaction is doing its thing.

After the allotted time, remove the plug and pour another kettle of boiling water down the pipe to remove the blockage.

Top Tip: You could also fill the bathtub and use gravity to do the work for you. When you remove the plug, 40 to 50 gallons of water bearing down on the blockage might be enough to dislodge it.

4. Boiling water

Often the easiest solution to unblocking drains, boiling water is surprisingly effective. The immediate impact of boiling water can cause the debris to move, especially if you have a mass of hardened soap, skin, and hair.

Don’t feel tempted to dump the entire kettle into the drain in one go. Pour it in stages, allowing the hot water to react with the gunk in the pipe. Pause for several seconds before resuming pouring.

If the water disappears, you have been successful.

5. Use a plunger

Plungers use water pressure to dislodge blockages in bathtub drains. Fill the bathtub with enough water to cover the drain. Place a rag in the overflow pipe and position the plunger over the drain hole, ensuring there is a seal.

Now, push down sharply 5 or 6 times to generate the necessary pressure to remove the offending debris from the pipe. On the last stroke, pull the plunger straight off the drain, causing a last pressure surge.

When you lift it free of the hole, the water should drain away rapidly.  

6. Chemical products

Before attempting this method, grab some rubber gloves and eye protection. Chemicals are extremely powerful and can release spatters that cause skin and eye burns. You might also want to invest in a facemask to avoid inhaling vapors.

Caustic soda is a well-known chemical used to lift blockages in domestic drains, but it does cause nasty burns. You can pick up caustic soda from most hardware stores.

Pour 0.75 gallons of cold water into a metal bucket and then add 3 cups of caustic soda. Make sure you stir the solution well using an old wooden spoon, and be careful of splashes.

As the contents mix, it will start to fizz and heat. Pour it into the hole and leave it for 20 to 30 minutes. Now flush the drain with boiling water. If the pipe is still blocked, repeat this process if necessary, until the water runs free.

7. Manually remove it

This method involves getting your hands dirty, as well as a small amount of dismantling work. Place an empty container below the U-bend part of the pipework to catch any excess fluid.

Use a plumbers wrench to loosen the slip nuts at both ends of the pipe. When the nuts are loose enough, continue the process using your hands. When the trap is free, take it out and turn it upside down.

Empty the contents into the container. If some debris remains in the trap, you will need to get your finger inside to fish about. Make sure you do the same with the pipes that attach to the trap.

Finally, rinse the trap with water and reattach. This is an effective way to remove blockages, but it is the most time-consuming method.

Top Tip: Use an old toothbrush to get the stubborn gunk out.

8. Use a plumber’s snake

A plumber’s snake is similar to a drain claw, except it is better suited to unblocking smaller pipes like sinks and bathtubs. However, the technique is the same. Start by inserting the snake into the drain, easing it gently forward.

When you hit the blockage, twist the snake and allow the hooked end to bite into the bottleneck. When you feel the resistance weaken and the snake moves freely, pull it back towards the drain entrance.

Wash away the remnants of the blockage with either a kettle of boiling water or by running the faucet.

9. Call a plumber

You would probably only call a plumber if you have tried all these methods without success. You can find a reliable plumber on sites like Tradehounds, which lists hundreds of options in your local area.

Most plumbers charge by the hour, ranging from $45 to $200. Some plumbers charge a flat rate depending on the job, with typical tasks costing between $175 to $400.

A plumber will get the blockage cleared, and their work is certified, so should you experience any issues resulting from the job, you will be covered.

How to Keep the Bathtub Drain Clear

There are a couple of ways to stop your bathtub drain from clogging. You could keep a solution of water and vinegar handy to empty down the pipe as the water drains away.

One of the most common reasons why a drain clogs is human hair. It washes down the pipe and clings to the sides, matting with waste material, including human skin. Keeping your strainer free of debris is the best way to avoid blockages.

You can also buy dedicated bathtub hair catchers to stop hair from snaking into the drain and building up.  

Unclogging Bathtub Drain FAQ

What can I pour down my bathtub drain to unclog it?

You can use chemical unblockers like caustic soda and Drano, which react with water and eat away at blockages. This is an effective and time-tested method, although there is an element of risk from burns and vapors.

You could also use baking soda and vinegar. It has a similar effect as caustic soda, except it is a little gentler.

What can dissolve hair in a drain?

Caustic soda, vinegar, baking soda, and even bleach dissolve hair, grease and grime commonly associated with bathtub blockages. Also, boiling water may not dissolve hair, but it effectively melts away dried soap scum and human skin flakes.

Other chemical drain unblockers claim to be dedicated hair dissolvers, but be careful because some of these solutions may work, but they also cause damage to your pipes.

How do you unclog a bathtub with standing water?

Baking soda and vinegar are some of the best ways to unblock a drain with standing water. As it reacts with the water, it starts to fizz and eat away at the blockage. Another method is to use a plunger.

The plunger pushes the excess water into the pipe with force. The pressure acts as a strong water flow, ebbing away at the debris until it dislodges.

Don’t Let Your Drain Cause You Strain

So, you have a stagnant pool of water in the bathtub, and it refuses to budge. Relax. All is not lost. As we’ve shown, there are simple methods you can employ to help you arrive at a happy solution.

Before you reach for your phone to book a plumber, give our tips a try. It might leave you feeling satisfied that you sorted the problem without professional help, and it will save you a small fortune on plumbers fees.

25 Different Types of Blinds for Your Home

Window treatments are a great way to tie a room’s design together while providing privacy, protection from the sun, and eliminating excessive sunlight.

Blinds and shades are the two most used window treatments. But making a purchase isn’t as simple as deciding between the two. Within each type of window treatment, there are various subtypes, with different features and looks. We’re featuring 25 of these different types.

We will also help you determine the difference between blinds and shades to decide which one better suits your needs. We’ll also look at some other important information you may need while shopping for window treatments.

Different Window Treatments

To put it simply, window treatments are a covering added over a window to enhance the room’s interior design. But window treatments also help provide privacy while reducing the amount of light that can shine through the glass.

Window coverings can also help protect your furniture from sun exposure. You can even find ones that block UV rays, darken your room, or provide insulation. Curtains or drapes look great on your windows, but they don’t always do a good job. But when paired with blinds or shades, you get style and functionality.

There are two common types that we will discuss today – blinds and shades. While both are useful to cover your windows, they do have different design features, making it easier for you to make a final choice on which to use.

Blinds

Blinds are a window treatment option that has been around for centuries. These coverings consist of evenly spaced slats operated by a corded ladder.

To raise or lower your blinds, you may need to pull a cord or lift on the bottom rail, depending on the style. To change the slats’ angle to block out or allow light, you twist the attached, long, plastic wand.

Point of View from a Parent

Here are a few notable experiences from a parent with four children and two dogs. Blinds are great for covering your windows, but you want to ensure the cord is out of reach, as it’s a temptation that children and pets rarely pass up.

When one slat breaks on a blind, you mind as well chunk it and buy a new one. Many of these cannot be repaired due to the ladder construction, which causes the slats to move against each other.

And some types can be challenging to adjust evenly. I can’t tell you how many collective hours I’ve wasted trying to get blinds to open evenly after one of my kids decides to play. It’s no fun at all! Especially for those with OCD who need things to be level and even.

Shades

Shades are another type of window treatment to block light, cold air and provide privacy. This option is a single solid piece of material that rolls up onto a round tube.

Unlike blinds, which have individual slats, shades will provide full coverage with no light filtering through the cracks since it’s a solid piece.

Adjusting shades is easier since these roll up neatly onto the tube. But if you use too much force when pulling them down, you can cause the fabric to tear or the rod to bend, which reduces the shade’s functionality.

Blinds Production Method

When shopping for blinds, you have two options. You can purchase some that are already ready-made. Or you can have some custom made. Let’s look at the differences between the two.

Ready-Made

Ready-made blinds are blinds that are built and shipped to a store to be sold. When you purchase ready-made blinds, they’re already made before you buy them. All you have to wait on is for them to ship to you. Or you can pick these up in a store and go straight home to install them.

Before you buy blinds, you should take the time to correctly measure your window so that you purchase the proper size. Improperly fitting blinds can detract from the aesthetic and fail to perform as hoped.

The first thing you’ll need to do before taking measurements is to decide if you want to mount your blinds inside the window or outside. This decision will affect how you will take your measurements.

Ready-made blinds come in a variety of styles, sizes, and types, so you’re sure to find ones that fit your window perfectly without needing to go with custom blinds.

Made-to-Measure

Some people may have oddly shaped or sized windows that won’t work with ready-made blinds. In this case, you may have to turn to made-to-measure options.

When you buy a made-to-measure blind, you have window coverings that are made custom to your size. However, because they are custom, there are a few drawbacks.

First, these are often more expensive than ready-made blinds because they are one of a kind. Second, you may have to wait a specific amount of time before you receive them because they have to be made separately from regular blinds.

When you purchase made-to-measure blinds, it’s essential that you get the measurements correct. Otherwise, you’ll be stuck waiting on a new set of blinds. And you may not be able to return the previous ones because it wasn’t the company’s fault that they didn’t work.

Blinds Operation

Blinds have two different modes of operation, depending on the style you buy. When shopping for blinds, you have to decide between manual and automatic. Let’s look at some criteria that will help you decide which one would be better for you.

Manual

Manually operated blinds require you to access the blinds to raise or lower them physically. It can be tiring having to go through your whole house every morning to raise the blinds so the light can come in. Then have to turn around and do it all over again that night to close them.

When you buy manual blinds, you have to use a string, chain, or another device to change the blind’s position. And you have to use the attached wand to change the slats’ angle.

Automatic

On the other side of the fence are automatic blinds, which operate from a motor. Automatic blinds do not require you to pull anything to make the blinds go up and down. Instead, you can control the blind’s positioning with a button, remote control, or a smart device.

As a busy parent, I feel that automated blinds make life much easier. You can set a timer for when they open and close or push a button to adjust them automatically. It’s so much easier than having to walk through every room and adjust every blind.

If you’re a fan of having your blinds change with the time of day, it may be worth it to invest in a quality automatic set that reduces the work you need to do. And for children, it reduces the chances of having broken blinds if your kid can’t figure out how to work a manual one.

Now, the downside of automated blinds. First of all, they’re more expensive. But given that they’re electric, that’s to be expected. It’s worth the extra cash for me.

And second, if there’s no power source, your blinds will not operate. Dead batteries or a power outage could mean you’re stuck in the dark (or light) until you’ve fixed the power.

Blinds Material

The great thing about blinds is that they come in various types of materials, so there’s no way you won’t find one that you like! Now the material can affect things like cost, effectiveness, and design. So take your time to look at each variety to decide which one sounds best.

Wood

Wood blinds have individual wood slates made of real wood. The type of wood can vary by company, so you’re sure to find one that matches your room palette, regardless of if you want dark or light wood.

Using wood blinds for your window treatment adds warmth with a style that never goes out of fashion. And they’re more durable against rough use compared to some other lightweight materials.

Wood can go with all designs, so it’s a great solution to add to a home where you’re continually redecorating. You’ll never need to change your blinds because they clash with the new look.

However, wood blinds can warp in hot climates, so that’s a factor to consider if you have brutal summers. And when opened, the way the wood slates stack can reduce your view out the window.

But you have to use care when cleaning wood blinds, as some products can cause damage to the wood grain. Only use cleaning products intended for wood to avoid issues.

Faux Wood

If you want the wood look, but you can’t stand the idea of trees being chopped down just to add style to your room, you’re in luck. Faux wood blinds may be just the thing you need.

A cheaper alternative than real wood slats, faux wood lets you have a wood look without sacrificing trees to get it. These blinds are made of composite wood (a wood center coated with polymer), vinyl, or PVC, but they look like real wood!

Faux wood blinds have a few advantages over real wood blinds. First, many are cheaper since they’re not real. Second, they are more durable against fading, warping, and cracking.

For homes with busy children, windows that will get lots of use, or locations where there are high humidity and heat, you can’t beat choosing faux over real wood.

And, my favorite reason, they’re easy to clean. You can use any type of cleaner without worrying that you’re damaging the wood grain.

However, faux wood will be heavier than real wood, which can be challenging to get into position if the top of the window is out of reach.

Plastic

Plastic blinds are usually made of a PVC blend, which allows you to achieve a pleasing room aesthetic without breaking the bank.

While plastic blinds are a cheaper solution, you get what you pay for in terms of quality. These blinds hold up well against moisture and heat, unlike wood, which can warp.

When you use plastic blinds, you don’t have to worry about warping, cracking, or molding, despite frequent exposure to direct sunlight or high moisture. And they do well for insulating your home to keep in heat or cold air.

But before you run out and toss a bunch of plastic blinds into your shopping cart, let us go over a few drawbacks of using this material.

Because PVC is a type of plastic, it contains traces of many different harmful chemicals. A shortlist of what your plastic blinds may have include:

  • Lead
  • Mercury
  • Vinyl chloride
  • Hydrochloric acid
  • Cadmium
  • Dioxin

This chemical composition is known to cause respiratory problems, congenital defects, and some types of cancer.

As your blinds age due to exposure to heat and the sun, they start to break down and release particles of these chemicals into the air, which you can breathe into your lungs.

The most concerning of these ingredients is the lead, which can form a layer of non removable dust over your blind slats. Trying to clean these puts lead into the air, which is extremely harmful to pregnant women and children under the age of 6.

Metal

Metal blinds are an excellent solution for large windows that have thin frames. Most of these are made of aluminum, which is lightweight, durable, and resistant to rust.

Many people prefer to use metal blinds due to affordability. Compared to other blind types, metal is among the cheapest, along with plastic and PVC. And they’re easy to clean with a simple wipe down using a wet cloth or a duster.

However, you’ll rarely see people using metal blinds from an aesthetic standpoint, meaning you probably won’t hang these up in your living room. But they’re a fantastic solution for garages, bathrooms, or utility rooms. And they’re fabulous to use for covering skylights.

Paper

Paper blinds are often used as a temporary solution window cover. These blinds are great for dorms, rental properties, tight budgets, or when you need your window covered temporarily, such as photography, photo development, or construction.

You can find paper blinds with light filtering properties that allow more sunlight to shine through while blocking direct sunlight. If you want to block out the most light, you can opt for a thicker product.

And if you need to block out all light, there are even blackout options. And they come in a wide variety of color choices so you can change your room’s look multiple times a month.

Now, these blinds won’t last nearly as long as traditional blinds, but they’re super easy to install. You mount these to your window frame or wall using the included adhesive strip. Then pull them down when you’re ready to remove them.

Natural Fabrics

Some types of blinds are natural fibers, which can add a touch of naturalism to your environment. Common natural materials include cotton, bamboo, linen, silk, and hemp.

Most of these will come in a shade design rather than a blind. The difference is that shades are made of a solid piece of material, whereas blinds are multiple slats that overlap each other to block out light.

Synthetic Fabrics

Blinds and shades can also be synthetic fibers such as nylon or polyester. These materials are durable, easy to clean, and less expensive options.

However, most synthetics are not as good at blocking out light and heat as natural fibers. You can find these in various types, colors, and styles.

4 Considerations When Buying Blinds

When shopping for blinds, there are some criteria to consider before making a selection. Buying blinds without considering the details can result in making the wrong purchase. Consider these factors.

Privacy/Light

You’ll want to consider how much privacy you want to get when your blinds are closed. You’ll also want to determine how much light you want to block.

Budget

You’ll also want to consider how much you want to spend. If you’re only buying blinds for one window, you may not mind splurging on an expensive model.

But if you’re covering multiple windows, you may choose to buy mostly cheap versions while spending extra money for ones that go in the main areas of your house.

Safety

For homes that have pets and small children, it’s best to choose cordless or automatic blinds. Cords can become a potential choking hazard.

Cleaning

Many varieties of blinds are low maintenance, so they don’t need a lot of cleaning. You can use a duster or a wet cloth and wipe them down. Some types of fabric shades can go into the washing machine or vacuum.

Features of Blinds

Blinds consist of individual slats of material stacked on top of each other or laid vertically. These louvers can angle to block or allow light. And they collapse together at the top (or side) of the window when open.

Most blinds also have a rope ladder system made of string or rope that connects the slats together. This system allows the slats to move together.

And blinds have a way to operate the blinds. Manual styles have a rope or chain that you pull to make the blinds lower or raise. Automated types have a motor that operates the slats.

Shades are a solid piece of fabric that lifts and lowers by rolling onto a tube or bar at the top of the blind. These can be manual or automated.

Where to Buy Blinds

Blinds are an everyday item that you can find almost anywhere. You can get them from retail or bargain stores, specialty blind shops, home improvement stores, home decor shops, or you can buy them online.

Amazon has plenty of blinds available in all different types. Blinds.com is another site for blind shopping that’s devoted solely to window treatments.

Types of Blinds

Now that we’ve covered what you need to know about blinds let’s get to the fun stuff. We’ve listed 25 different types of blinds for your home.

1. Vertical Blinds

Vertical blinds have vertical running slats of varying material, meaning they run top to bottom instead of horizontally, with each slat stacked on top of each other.

Despite the different look, these operate like Venetian Blinds by tilting the flats in or out. A wand allows you to open the windows left or right and controls the louvers.

2. Venetian Blinds

The most common type of blinds is Venetian blinds. This style has 2″ horizontal slats operated by a rope system of strings or cloth strips. The slats can be plastic, aluminum, or wood – although many in the US consider wood slats as wood blinds instead of Venetian.

Pulling the string causes the bottom slat to press into the one above it, collapsing the blinds closed. A tilt rod adjusts the angle of the slats almost 180-degrees to control privacy and light.

3. Mini Blinds

Mini blinds have smaller 1″ thick slats, but they operate the same as Venetian blinds, but you can also open and close individual slats.

This option is better for smaller windows and comes in various materials and colors. When you crack the slats of a mini blind, it allows you to see more from outside.

4. Micro Blinds

Micro blinds are the smallest version of blinds available. These are the same thing as a Venician or mini blind but on a smaller scale.

The slats of micro blinds are ½” thick and the shortest length of all blinds. If you have a small bathroom or utility room window that gets dominated by a regular or mini-sized blind, you may need a micro.

5. Panel Blinds

Panel blinds are the best window covering option for large windows and glass doors like patio, sliding, or French. You mount these to the ceiling or wall. A tract allows the fabric panels to slide back and forth or stack to the side out of the way when opened.

These blinds come in different fabric options, as a solar screen or made of woven wooden materials. Many people use panel blinds in combination with other window coverings.

6. Pleated Shades

Pleated shades or pleated blinds are a single piece of fabric with no slats. These let in more light, as many are sheer, which does reduce your privacy.

You can get these as cordless bottom-up, top-down, or cordless, which is safer for homes with pets or children. These shades are more cost-efficient and disappear when you raise them.

7. Cellular Shades

Cellular shades are an energy-efficient solution for window coverings. Some people refer to this style as honeycomb due to the unique design of honeycomb (6-sided hexagonal) air pockets (cells), which offers the highest insulation.

You can find these as single – one air pocket or double cells – two pockets. This style of shades has crisp pleats that control how these fold up.

They come in various colors, light control (sheer or blackout), and pleat sizes. You can get these as motorized, top-down, bottom-up, or cordless.

8. Roman Shades

Roman shades are a classic style of fabric window coverings that lends an air of modern polish to your room. You can get these shades in plain, soft, standard flat, or European folds.

All Roman shades have a pull cord or continuous loop cord that controls lowering and raising the shades. These cords affect how the panel drapes at the bottom.

9. Roller Shades

Roller shades come in both blackout and light filtering options, so you have full control of how much sunlight comes into your room.

This window treatment style is a single piece of fabric that rolls over a central dowel to open and close. When open, the shade lays flat. When you close it, the material rolls up and secures at the top.

10. Tie Up Shades

Tie up shades have heavy influences from London balloon shades. This style consists of a solid material curtain panel suspended by a curtain rod. You can find tie up shades in multiple materials, including sheer linen, translucent polyester, lace, silk, cotton, wool, velvet, or cotton.

There are two or more bands spaced out along the panel’s width, which creates adjustable scallops. These bands can be cords, tapes, clips, ribbons, or strings that allow you to lift and lower the panel.

11. Outdoor Blinds/Shades

Outdoor shades and blinds are specifically designed for outdoor use. They’re the perfect option for patios, sunrooms, decks, and pergolas. These are great for protecting your outdoor furniture from sun damage.

These window treatments are weather-resistant fabrics so that they can handle the elements without damage. And many block dangerous UV rays so you can enjoy the sun without harm.

12. Solar Shades

Solar shades are fantastic for blocking sunlight that other window treatments can’t. If your windows directly face the sun, you may want to consider installing solar shades, which can also block UV rays and reduce glare and fading.

This window treatment option consists of a single piece of tightly-woven material coated to block out heat and light. Most solar shades are vinyl, although there are other materials too.

These come in different percentages ranging from 1%, 3%, 5%, or 10%. The lower the number, the more it blocks, with 1% being the darkest. A 10% solar shade will let in some light.

13. Shutters

Shutters are a window treatment made of faux or real wood louvers inside a solid frame. You can use a tilt rod found on the back or at the middle of the shutter to adjust the slats.

You usually see shutters mounted on the exterior of a house, framing the windows. When bad weather happens, you can close these to protect your windows.

But there are also interior shutters, which you put on the inside of your house. You can close these to block out cold weather and sunlight.

14. Roller blinds

Roller blinds also classify as a shade due to their design. This blind type is one of the few that consists of one solid piece of material instead of individual slats.

These shades have a round tube at the top of the window, where the fabric attaches. When pulled down, the fabric blocks the window. You use a sidewinder to roll the shade up over the bar when you want it open.

15. Wooden blinds

Wooden blinds have slats made of wood. You can tilt these to control the privacy and how much light comes in. These are a heavier type, so you want to make sure and secure them properly.

These blinds have a rope ladder system, and the slats stack one on top of the other, running horizontally. When you close these, they fold from the bottom up.

16. Day-Night blinds

Day-night blinds are a versatile option that includes stripes of room darkening opaque fabric and translucent, light filtering fabric combined into one product.

These blinds operate the same as traditional ones, using a chain (or remote control) to adjust the roller positioned at the blinds’ top. You can set all the slats to opaque to get a blackout effect or put them to translucent, so you have privacy without blocking the sunlight.

17. Blackout blinds

Blackout blinds are an everyday staple in bedrooms due to their light-blocking capabilities. These blinds operate the same as any other blind with a roller.

The fabric stores inside a cassette and runs alongside channels, blocking light around the edges. When mounted inside the window casing, you can achieve almost full light blockage.

18. Plantation shutters

Plantation shutters are wood structures that fit your window frames, offering insulation, privacy, and protection from the sun.

These shutters have tilted wood louvers that you can adjust. And they open like doors so you can use your window like usual.

19. Conservatory blinds

Conservatory blinds come in different materials and designs. You want to find ones that will accommodate the massive heat loss you’ll suffer from having a room with so much glass.

Honeycomb blinds, pleated, French pinoleum, Roman, English, Venetian, sheer rollers, and roof blinds are suitable choices for covering conservatory windows.

20. Skylight blinds

Skylight blinds are window treatments specifically designed for skylights. These hard to reach windows can be tricky to cover due to the angle and height.

The best types of blinds for skylights are mini blinds, although cellular or pleated shades are also ideal. You may want to find remote control operated versions for more effortless opening and closing.

21. Office blinds

Office blinds are useful for reducing shadows, glare, and reflections. They also help maintain temperatures and provide privacy and prevent distractions.

Multiple types of blinds can work for office blinds. Wood blinds and shutters give the space privacy and design appeal, but they’re rarely for large office spaces. Solar screens and cellular shades are two options that allow light and privacy.

22. Electric blinds

Electric blinds have a small motor that turns the shaft to raise or lower the blinds. There’s a button or a remote that controls the battery-powered or electrically-powered motor.

Some of these allow you to control them through a switch on the wall. Other models will enable you to work them through an app downloaded to your device. These blinds are efficient and easier to use than having to set each individual blind physically.

23. Cordless Blinds

Cordless blinds bring simplicity into your home, eliminating the hassle of pulling cords to raise or lower the blinds.

These blinds still have cords that keep the blind slats aligned and help them close and open. They’re cordless because you don’t need to pull a cord or string to operate them.

Instead, you can raise and lower these blinds by lifting or pulling down on the bottom rail. To tilt the slats to allow or block light, you angle the bottom rail back or forth, which will turn the slats angle.

24. Automatic Blinds

With everything becoming automatic, it’s no surprise that you can now do the same with your blinds. Automatic blinds have a quiet, powerful motor that runs off electricity or batteries.

This motor controls the blind’s movements on the track so you can achieve the ideal position with a click of a button from your wireless device or set an automated timer so they open or close at a specific time.

You can find these blinds in multiple styles, including pleated, cellular, wood, Roman, draperies, solar, and roller shades.

25. Smart Blinds

Smart blinds also have built-in motors and sensors that allow for adjustments based on the lighting outside. These coverings can be programmed to raise and lower on set schedules such as time or days.

Other names for smart blinds are automatic blinds, automated blinds, or smart shades. And many of these can pair with smart home systems or virtual assistants so you can control them with your voice.

Conclusion

With so many various blind options, it can become overwhelming trying to make a final decision. We’ve broken down the 25 most common blind types and provided a brief description of each. We also explained the differences between blinds and shades and listed other helpful information you may need while shopping for window blinds.

18 Roofing Materials to Consider for Your House (Custom Graphics)

What is more important than a watertight house? Roofing materials not only keep your home dry, but they also insulate against heat loss, as well as protecting the structure. Plus, it has to look good too.

With that in mind, we take a look at 18 different types of roofing to give you the facts about how good they are and why you should use them.

types of roofing materials

1. Rolled Roofing

If you want a roof that’s quick to install and costs a fraction of other types, rolled roofing is the answer. It works best on low-slope residential and industrial roofs, as well as outbuildings and sheds.

Typically, it comes in long rolls of asphalt and mineral impregnated material with a granular top. Each roll covers about 100 square feet of space and comes in 3-foot strips.

If you are less worried about how the roof looks and more concerned with costs, rolled roofing is an excellent solution. And thanks to the speed it lays, you can cover large areas in no time. It costs between $2 and £3 per square foot to install.

You can either torch-blow it into position or use roofing nails. The downside is longevity. It lasts about 10 years before you need to replace it.

2. Built-Up Roofing (BUR)

Built-up roofing is a tried and tested roofing method for buildings with no or very low pitches. BUR systems work by applying several layers of roof felt impregnated with asphalt. The layers are applied in overlapping layers, using heat to seal them in place.

BUR is applied in two to four layers, with a final topping of crushed stone embedded in hot tar to seal the roof against the elements.

Expect to pay between £3 and $6 per square foot, but the good news is it lasts on average between 20 and 30 years.

3. Membrane Roofing

Membrane roofing is another ideal low-pitch option. Membranes come in several varieties, including:

  • Neoprene (polychloroprene).
  • EPDM (Ethylene propylene diene monomer).
  • PVC (polyvinyl chloride).
  • Polymer-modified bitumens.

The standout synthetic roofing material is EPDM, which is often called “rubber roofing.” It is similar to rolled roofing because it comes in large sheets with limited seams to reduce water ingress.

If properly maintained, you should get 20 to 30 years of useful life out of membrane roofing; plus, it costs between $4 and $6 per square foot, so it’s excellent value for money.

4. Asphalt Composite Shingles

Asphalt composite shingles are the nation’s favorite type of roof covering. More homes have this in the USA than any other variety.

It consists of asphalt and mineral granules topped on a fiberglass base, and they are an excellent all-round roofing option. Because each shingle is applied individually, it makes repairs easier as you only need to replace the damaged ones rather than the entire roof.

These shingles are also flexible to accommodate your building’s expansion and retraction movements.

Costs vary from $2 to $4 per square foot installed, and can last as long as 15 to 30 years if maintained.  

5. Standing Seam Metal Roofing

This is the most common type of metal roof. It gets its name from the aluminum or steel sheets that meet in raised seams to interlock and keep the rain out.

If you live in an area that gets significant snowfall, this is the roof to choose, thanks to its strength and ability to repel water. These roofs are also fireproof, making them ideal for buildings in areas of high forest fire risk.

Metal roofs require specialist fitters, so check with your local experts to see if they have the know-how to perform an installation. Expect to pay between $6 and $12 per square foot installed.

The great news is these metal roofs last up to 75 years, so they are worth every nickel and dime; plus, when it needs replacing, you can recycle the old sheets.

6. Metal Shingles

If you want all the advantages of a standing seam metal roof without the appearance, metal shingles are an ideal solution.

They come in steel or aluminum shingles and are pressed into shape and then finished with a baked-on coating to protect them against the elements.

These tiles can replicate most roofing materials, from metal, clay tile, asphalt shingles, wooden shakes, and even slate. If you care about the appearance of your roof, metal shingles are the best choice.

These shingles last between 30 and 50 years and cost around $7 to $10 per square foot installed. 50 years for such a low outlay is incredible value for money.

7. Metal Shakes

Metal shakes are similar to metal shingles in that they are pressed and mineral or baked-on coated to give the maximum protection to the material. They also work well in areas of high fire risk and heavy snowfall.

They are installed individually, making it easier to perform roof repairs, and they last between 30 and 50 years. The costs are similar too, ranging from $7 and $10 per square foot installed.

8. Wood Shingles

If you want your roof to scream quality and impact, wooden shingles deliver. It’s the reason why you often see them installed on luxury homes. The cedar or redwood shingles are thin wedges of wood, produced using precise techniques.

While they may look good, it’s fair to say they are expensive, ranging between $5 and $10 per square foot installed.

Also, they have a relatively short life if you live in a damp climate. Here, they last on average 20 years, but if you live in a dry climate like California, that leaps to 60 years.

This type of roofing material is unsuitable for those living in areas where heavy snowfall is common or forest fires are a risk.

9. Wood Shakes

Wood shakes share all the qualities of wood shingles except for a few crucial differences. Shakes are less refined but thicker, made from split wood with a rougher surface.

The thickness of the material makes them better at withstanding the elements. They look as good as wood shingles but last a bit longer.

Longevity comes at an increased cost, with shakes costing around $7 to $12 per square foot installed.

10. Clay Tile

Clay is a common material in hotter climates or coastal areas with high salt content in the atmosphere. Clay is hard-wearing, thanks to the firing technique, and they are typically left unglazed to reveal that wonderful rich orange-red color.

They are constructed from earthen clay and molded in any rolled or interlocking shape. It is an expensive building material, costing between $10 to $18 per square foot installed.

You can get the less common ceramic tile instead, but this pushes your costs up to $30 per square foot installed. Once in situ, clay tiles will last well over 100 years.

11. Concrete Tile

Concrete tiles are similar to clay tiles in construction and installation, but they are a much cheaper alternative. They are molded from a sand-based concrete mix and can be shaped and colored in almost every variable you can imagine.

Concrete tiles cater to low-profile roofs with a rolled clay-effect tile or wood-effect shakes.

Concrete costs about a third of clay tiles, coming in at about $10 to $12 per square foot installed. And they are heavy, so you will need to make sure your rafters and beams have the strength to take the added weight.

Expect to get about 50 years from a concrete roof before it needs replacing.

12. Slate Tile

Slate is so hard-wearing, it is likely to be the only roof you will need to install. It should last between 80 and 200 years or more, so it is the perfect choice if you live in a harsh environment.

It also looks amazing, capping off any home’s appearance with class and style. Slate is a good roofing material because it is easy to split into thin sheets that are impervious to the weather.

However, slate is also expensive, costing somewhere between $30 and $75 per square foot installed. Plus, finding a professional familiar with slate is tricky because so few companies use it due to the high costs.

If price is not an issue and you want a permanent roof that lasts the distance, give slate a go.

13. Slate Shingles

Slate shingles have the same longevity as slate tiles. They are also easier to install. A shingle roof might take a day to complete, whereas a slate tile roof is more intricate.

Slate shingles and tiles have a similar cost. Expect to pay between $30 and $75 per square foot installed.

14. Synthetic Roofing

Synthetic roofing is a generic term that covers a multitude of rubber or vinyl roof coverings. You can get slate-effect, tiles, shakes, shingles and many more varieties. This type of roofing is often termed “Composite roofing.”

Synthetic roofing typically contains recycled plastics or rubber, and it has the advantage of being a lot lighter than other materials. They can also stave off the effects of mold and mildew, thanks to how the material is chemically treated.

Several manufacturers also claim that synthetic roofing is fireproof, making it the ideal material to use in high risk areas.

Expect to pay somewhere between $3.50 and $5 per square foot. Most synthetic roofs should last between 50 and 75 years.

15. Eco-Friendly Green Roof

If you have moss on your roof, it is generally a bad sign, but a properly planned living roof is an effective material.

It is planet-friendly, releases oxygen back into the atmosphere, insulates your home, and absorbs rainwater. The other plus is you can grow plants.

To create a green roof, first lay down a waterproof membrane and allow for adequate drainage. A living roof can be intensive, meaning it supports plant life and people, or it can be extensive, which is better for lighter duties.

The costs of installing an eco-friendly roof vary enormously, but if you are willing to spend to make an environmental statement, go for it.

Just remember that living roofs require a lot of maintenance to keep them looking their best, so you had better have a head for heights.

16. Solar Tiles

Solar tiles perform the same as solar panels, but they form part of your roof rather than an additional bolt-on. These tiles are constructed from photovoltaic cells, which creates an electric field when the sun shines on them.

Solar tiles and shingles are more durable than standard shingles, so they are an effective roof material. The other advantage of solar tiles compared to panels is they cost less to replace when something goes wrong.

The disadvantage of solar tiles is the cost. They are extremely expensive. If you were to install a Tesla solar-tiled roof on a 2,000 square foot home, it would set you back about $42,000, which is just over $21 per square foot installed.

17. Stone-Coated Steel

Stone-coated steel roofs are a relatively new material, so you might struggle to find a qualified installer. They were first developed in New Zealand some 50 years ago and have since gained popularity in the US.

 Typically, this type of roofing material is made from recycled materials, so it is an eco-friendly alternative. Also, some insurance companies offer discounts for homes with stone-coated steel roofs because of their weather and fire resistance.

Another huge advantage is you can lay this material straight onto asphalt roofs without the need to rip it out and start again.

There are plenty of other advantages to consider:

  • Metal is more energy-efficient.
  • Stone-coated steel is more durable.
  • It typically has a 50-year warranty.
  • Metal roofs require less cleaning.
  • Can handle wind and rain.
  • Fire-retardant.
  • Lightweight.

Stone-coated metal roofs are not cheap. Expect to pay between $185 and $400 per square foot installed. So, if you have a 1,200 square-foot roof, the costs could vary from $7,000 to $10,100.

If you like the sound of rain hitting your roof, then you will like this material. It is very noisy. For a quiet life in bad weather, choose a different material.  

18. Rubber Slate

Rubber slate shingles look surprisingly similar to natural slate roofs but are constructed from polymer mixed with recycled plastic and rubber.

Rubber slate is lightweight, so if you have a roof that supports less weight, this is a viable alternative to slate. It isn’t as durable as slate, but you still get a 50-year warranty.

Expect to pay between $6 and $12 per square foot installed.

Roofing Materials FAQ

What is the best material to use for a roof?

It is a question of location and house-type. If you have a low-pitch roof, asphalt is a great material to use. Membrane and rolled roofs are also real contenders.

However, if you live in a high fire risk location like the forest, you will need a fire-resistant material like metal or slate. You could also try clay shingles.

For those who live in colder climates, the weight of heavy snowfall can cause issues with your roof, not to mention water damage. Try using a raised seam metal roof or clay and metal shingles. Slate is another great material for heavy snowfall.

What is the most durable roofing material?

Metal and slate roofs are the most durable. You will probably never need to replace a slate roof as it gives over 200 years of service. Most stone-coated metal roofs come with a 50-year warranty and protect for 100 years plus.

What is the cheapest roofing material?

The cheapest roofing material is rolled or asphalt. They are lightweight and easy to install but give the least longevity. Expect to get between 10 and 20 years before they need replacing.

Rolled roofing costs between $2 and $3 per square foot, while asphalt is similar, costing $2 to $4 per square foot.

Truth About The Roof

Weighing up which roof material is right for you is a matter of choice, suitability, and budget. Some people will be happy with a rolled or asphalt roof, and that’s fine as long as you know to replace it in 10 or 20 years.

Others will spend big and get a roof that lasts a lifetime or more. You should also consider your environment. A roof on a home in California does not have the same demands placed on it as an Alaskan roof.

Whichever material you choose, remember that the way your roof looks can really frame your house and make it stand out.

46 Different Types of Orange Flowers (Custom Graphics)

There’s something incredibly breathtaking about orange flowers that make them stand out among other flower colors. We’ve put together a list of 46 different orange flowers with the flower’s type, growing zone, sun and water needs, soil pH, other names, and the flower’s shape. We’ve also given a few interesting facts for these.

types of orange flowers

1. Aloe Vera

aloe vera orange flower
  • Type – Perennial
  • Hardiness zone – 8 – 11
  • Sun – full
  • Water – Low
  • Soil pH – 6 to 7
  • Blooming season – Fall to Winter
  • Common names – Chinese aloe, true aloe, Barbados Aloe, Indian Aloe, First Aid plant, burn aloe
  • Flower shape – conical spikes; orange or red color.

Interesting Facts:

Aloe is medicinal. The gel inside the stems is excellent for burns and minor scrapes.

2. Alstroemeria

Alstroemeria orange flower
  • Type – Perennial
  • Hardiness zone – 8 – 10
  • Sun – full
  • Water – Moderate
  • Soil pH – 6 to 7
  • Blooming season – Late spring to early fall
  • Common names – Princess Lily, Peruvian Lily
  • Flower shape – 2″ trumpet-shaped formed in clusters; orange, pink, white, red, or salmon-colored; freckles or tiger stripes

Interesting Facts:

Peruvian lilies are often used for bouquets due to their excellent vase life, retaining their bright color for up to two weeks.

3. Begonia

Begonia orange flower
  • Type – Perennial
  • Hardiness zone – 10 to 12
  • Sun – Moderate
  • Water – moist soil
  • Soil pH – 5.2 – 6
  • Blooming season – Early summer to fall (June to the first frost)
  • Common names – none
  • Flower shape – single, double, or ruffled; orange, white, yellow, or red color; upright or trailing design. Varying sizes

Interesting Facts:

There are over 1,000 species of Begonias. This plant is toxic to pets and can cause allergic reactions in some humans. Begonias have medicinal purposes.

4. Bird of Paradise

Bird of Paradise flower
  • Type – Perennial
  • Hardiness zone – 9 – 12
  • Sun – Full sun to partially shaded
  • Water – moist but well-drained
  • Soil pH – 5.5 – 7.5
  • Blooming season – Fall to Spring
  • Common names – Crane flower
  • Flower shape – three orange petals fused with three blue petals

Interesting Facts:

The Bird of Paradise flower is the official flower gift for a ninth wedding anniversary. This plant is a relative to the banana tree and shares similar large green fan leaves.

5. Bulbine

Bulbine orange flower
  • Type – Perennial succulent
  • Hardiness zone – 9 – 11
  • Sun – Full sun
  • Water – well-drained soil watered weekly; drought tolerant
  • Soil pH – 6 to 7
  • Blooming season – Spring to late summer
  • Common names – cat’s tail, burn jelly plant, snake flower, chigger flower, butterfly milkweed
  • Flower shape – Orange star-shape

Interesting Facts:

The Bulbine plant is a native of South America. In 2006, the Florida Nursery Growers and Landscape Association named this flower the Plant of the Year.

The leaves of Bulbine plants have medicinal purposes. The sap works the same way as aloe, so it’s ideal for burns.

6. Butterfly Weed

Butterfly Weed flower
  • Type – Perennial succulent
  • Hardiness zone – 3-9
  • Sun – Full sun
  • Water – dry, well-drained
  • Soil pH -neutral
  • Blooming season – Spring to mid or late summer
  • Common names – yellow milkweed, orange milkweed, pleurisy root, chigger weed
  • Flower shape – Clusters of small yellow or orange flowers

Interesting Facts:

In addition to butterflies, Butterfly Weeds are also favorites of bees, other insects, and hummingbirds.

The roots have medicinal purposes; chewing them releases pleurisy and pulmonary problems while making them into tea treats stomach ailments like diarrhea.  

7. Calendula

Calendula flower
  • Type – Annual
  • Hardiness zone – 2-11
  • Sun – Full sun
  • Water – well-drained
  • Soil pH – 6 to 7
  • Blooming season – spring to late fall
  • Common names – pot marigold
  • Flower shape – single or double round shape; slender yellow-orange petals

Interesting Facts:

Calendula petals are edible and add a spicy taste to salads, broths, and stews, similar to saffron. In the past, these petals were often used as a natural food coloring for butter and cheese.

8. California Poppy

California Poppy flower
  • Type – Annual/Tender perennial
  • Hardiness zone – 2-11
  • Sun – Full sun
  • Water – well-drained loamy
  • Soil pH – 5.2 to 8.3 (6.5 to 7.5 ideal)
  • Blooming season – fall to late winter (early spring in some climates)
  • Common names – golden poppy, cup of gold, California sunlight
  • Flower shape – flowers have four petals; orange, pale yellow, or cream when growing wild; white, pink, or red cultivated varieties.

Interesting Facts:

California Poppy is the California state flower. These go dormant during the hot summer months in some areas. But in coastal areas, they’ll bloom throughout the summer.

A unique trait is that the petals close at night and when it’s cloudy. It’s best to enjoy these flowers growing in nature. The petals fall off if you pick them from the stalk.

9. Canna

Canna flower
  • Type – Perennial
  • Hardiness zone – 8-12; in zones, six or below, dig up and store inside for winter.
  • Sun – Full sun
  • Water – consistently moist
  • Soil pH – 6.0 – 6.5
  • Blooming season – late spring to early fall
  • Common names – Canna lily, Tropical lily
  • Flower shape – tall, ruffled with spikes and refined buds; orange, pink, red, and yellow

Interesting Facts:

Hummingbirds love Canna’s large, colorful flowers, which are commonly called canna lilies. However, they are not a member of the lily family.

10. Carnation

Carnation flower
  • Type – Perennial
  • Hardiness zone – 5-9
  • Sun – Full sun
  • Water – well-drained
  • Soil pH – 6.0 – 6.5
  • Blooming season – late spring to early summer
  • Common names – Flowers of God, clove pink, flower of love
  • Flower shape – multiple fully double, ruffled petals; orange, magenta, pink, white, bicolors

Interesting Facts:

There are dozens of varieties of carnations that flower heavily. The flowers have a spicy clove fragrance. The carnation is one of the oldest cultivated species in history.

Ancient Greeks and Romans used carnations for decor and art. In Christianity, it’s believed the first carnation grew from the tears Mary wept as Jesus carried his cross.

11. Chrysanthemum

Chrysanthemum flower
  • Type – Perennial
  • Hardiness zone – 4-9
  • Sun – Full sun
  • Water – well-drained, evenly moist
  • Soil pH – 6.5
  • Blooming season – late summer to fall
  • Common names – Mums
  • Flower shape – pompon petals form globular bloom; single or semi-double daisy design with center disk and ray florets; semi-doubles with raised pincushion center; spider, quill, and thistle have thin tube-like petals and closed center

Interesting Facts:

Chrysanthemums are the second most common flower with 40 wild species and thousands of cultivated varieties. This flower species has been proven to reduce air pollution and repel insects. And it’s the birth flower of November.

In Chinese and Japanese cultures, the mum plant is a symbol of youth. In China, it’s believed that mums prevent gray hair and that a single petal at the bottom of a glass of wine can improve longevity.

12. Cockscomb

Cockscomb flower
  • Type – Annual/Perennial in zones 9-10
  • Hardiness zone – 6-11
  • Sun – Full sun to light shade
  • Water – moderate to well-drained
  • Soil pH – 6.5
  • Blooming season – summer to early fall
  • Common names – wool-flower, feathered amaranth, red fox
  • Flower shape – Flat fan base with convoluted ridged heads made of many tiny flowers 5″ tall and 4″ wide

Interesting Facts:

Cockscomb gets its name due to the similarity of the flower’s design to a rooster comb. The flowers at the base will be lighter than the flowers at the top. Some varieties can resemble a cauliflower.

13. Coppertips

Coppertips flower
  • Type – Annual/Perennial in zones 9-10
  • Hardiness zone – 6-11
  • Sun – Full sun to partial shade
  • Water – average, well-drained
  • Soil pH – neutral 6.5-7.5
  • Blooming season – mid to late summer
  • Common names – montbretia, Crocosmia
  • Flower shape – tubular, strappy foliage; orange, yellow, or red

Interesting Facts:

Planting crocosmia is a great way to attract hummingbirds to your yard. And these blooms make great vase plants as they can last up to two weeks after cutting.

These plants can cause gastrointestinal issues for pets if eaten. Keep these plants out of reach, including bulbs, leaves, and flowers.

14. Cosmos

cosmos flower
  • Type – Annual
  • Hardiness zone – 2-11
  • Sun – Full sun
  • Water – well-drained loamy
  • Soil pH – 6.0 to 6.8
  • Blooming season – summer to fall
  • Common names – Diablo
  • Flower shape – 3″ to 5″ bowl or open cup-shaped; orange, pink, maroon, white, and red and yellow

Interesting Facts:

Cosmos can grow to be between 18″ and 60″ tall, depending on the species. There are over 25 varieties in various colors and sizes.

15. Crown Imperial

Crown Imperial flower
  • Type – Perennial
  • Hardiness zone – 5-9
  • Sun – Full sun to partial shade
  • Water – moist, well-drained
  • Soil pH – 6.1-7.8
  • Blooming season – mid-spring to early summer
  • Common names – Fritillaria imperialis, formerly called Persian Lily
  • Flower shape – bell-shaped

Interesting Facts:

The translation of imperialis is “of the emperor,” which refers to how the flowers form a circle, resembling a crown.

Legend says these flowers used to be white and grow upright towards the sun. But on the day Christ died, all the flowers in the world drooped with sadness, except the Crown Imperial. Full of guilt, these flowers blushed crimson and now droop down.

16. Cymbidium Orchid

Cymbidium Orchid flower
  • Type – Evergreen
  • Hardiness zone – 10-12
  • Sun -partial sun/indirect sunlight; best to have few hours of morning light and shady afternoons
  • Water – frequent water in growing season; reduced water during winter bloom
  • Soil pH – 5.5 to 6.5
  • Blooming season – mid-fall to mid-spring
  • Common names – Cymbidium orchid, boat orchid
  • Flower shape – large, showy 2″ to 4″ blooms with three colored sepals, one lip, and two colored petals

Interesting Facts:

Cymbidium orchid flowers are often used in corsages and wedding decorations, although the blooms are versatile enough for other designs. This species is cold-tolerant.

It’s believed that these orchids have medicinal powers and are commonly used to improve eyesight, boost the immune system, and to treat cancer.

17. Dahlia

Dahlia flower
  • Type – Tender annual
  • Hardiness zone – 3-11 (winter hardy in 8-11/annual in 3-7)
  • Sun – Full sun – 6 to 8 hours direct sunlight
  • Water – consistent, drip irrigation or deep water once or twice a week
  • Soil pH – 6.3 to 7
  • Blooming season – mid to late summer (middle of July)
  • Common names – Houdini of the garden, queen of the autumn garden
  • Flower shape – produces large double ring flowers on large stems many orange varieties ranging in size from 2″ up to 12″ diameter

Interesting Facts:

There are over 50,000 species of dahlias. This flower got its name from Anders Hahl, an 18th-century botanist from Sweden.

This flower is a sign of elegance and dignity, betrayal, travel, change, warning, and diversity. The dahlia has eight genes, whereas most other flowers only have two.

18. Daylily

Daylily flower
  • Type – Perennial
  • Hardiness zone – 6-11
  • Sun – Full sun or shade
  • Water – well-drained soils; watered every couple of days for the first few weeks; once or twice weekly during the first growing season
  • Soil pH – 6 to 6.5
  • Blooming season – early summer (June)
  • Common names – varies by species
  • Flower shape – full and round; broad petals with ruffled borders and edges; spidery; double petals and sepals; triangular; trumpet

Interesting Facts:

There are over 80,000 species of daylilies, adaptable to all climates. They come in various shapes, colors, sizes, and appearances.

19. Gerbera Daisy

Gerbera Daisy
  • Type – herbaceous perennials/annuals in cold climates
  • Hardiness zone – 8-11
  • Sun – full sun; afternoon shade during high afternoon temperatures
  • Water – 1″ a week; more frequently during dry spells or when growing from seeds
  • Soil pH – 5.5 to 6.5
  • Blooming season – early spring through autumn
  • Common names Transvaal daisy, Barberton daisy, quilled, Gerber
  • Flower shape – 2″ to 4″ blooms with a light-bronze, yellow or dark center. Orange, red, or yellow rays; single or double-flowered

Interesting Facts:

These South African and Asain native flowers have a special meaning dating back to Victorian times. The color of each flower signifies an emotion or expression.

They are symbols of strength and purity and the astrological flower of Scorpio (Oct 23 to Nov 21), and the flower for April.  

Gerbera flowers are used in traditional flower arrangements, including mass flowers and for weddings.

20. Helenium

Helenium flower
  • Type – Perennial
  • Hardiness zone – 3 through 8
  • Sun – Full
  • Water – weekly with more during high heat
  • Soil pH – 5.5 to 7
  • Blooming season – summer to fall
  • Common names – sneezewood
  • Flower shape – 1″ to 2″ diameter; daisy or composite pattern with 11 to 21 rays surrounding the central disk. Notched ends with three lobes at the tip.

Interesting Facts:

This plant is called sneezewood because, in the past, it was a component of snuff. However, despite the name, it will not affect those with allergies.

Butterflies are highly drawn to Helenium plants due to their high pollen count. These plants make fabulous cuttings for vases, but they cannot withstand periods of drought while growing.

21. Honeysuckle

Honeysuckle flower
  • Type – Perennial
  • Hardiness zone – 4 to 9
  • Sun – full sun or partial shade
  • Water – average, well-drained
  • Soil pH – 5.5 to 8
  • Blooming season – Spring to early fall (depending on variety)
  • Common names – Orange honeysuckle, western trumpet, northwest honeysuckle
  • Flower shape – narrow trumpet-shaped; forms in clusters on the tip of branches

Interesting Facts:

Honeysuckles produce sweet nectar that is a typical snack for anyone who walks by these blooming vines. The nectar is also a favorite of hummingbirds.

The name lonicera ciliosa comes from Adamus Lonicerus, named after Adam Lonitzer, a German botanist. It means to have small, fringy hairs like eyelashes and refers to this vine’s hairy leaf edges.

22. Iris

iris flower
  • Type – Perennial
  • Hardiness zone – 3-10
  • Sun – 6 hours full sun
  • Water – well drained
  • Soil pH – 6.8
  • Blooming season – Spring to summer
  • Common names – goes by many names depending on species
  • Flower shape – irises can be bearded (most popular) with soft hairs on the lower petals, beardless, or crested (less common).

Interesting Facts:

Iris flowers have been used throughout history by Egyptians and Indians for medicinal purposes and natural fragrance to produce perfumes, which were an offer to the gods.

The iris has been used as the fleur-de-lis, a symbol of French royalty, on multiple flags and banners throughout time, from as far back as King Clovis I in the early 500s, King Louis VII in 1147, and Edward III, the king of England in 1376.

The bearded iris flower is the state flower for Tennessee, and the fleur-de-lis is the emblem of New Orleans, Louisiana. In Germany, iris roots (orris roots) keep beer fresh. There are over 200 different species.

23. Lantana

Lantana flower
  • Type – Perennial in zones 9-11/Annual in zones 1-8
  • Hardiness zone – 7-11
  • Sun – full sun for 6 hours with afternoon shade
  • Water – well-drained or dry
  • Soil pH – 5.5 to 6.5
  • Blooming season – late spring to the first frost
  • Common names – shrub verbena, Lantana Camara
  • Flower shape – round clusters of small bright flowers; orange, yellow, white, purple, or red

Interesting Facts:

There are over 150 species of Lantana throughout the world. In Australia, this species is invasive. They are a common species to use for landscaping and come in various sizes, colors, and varieties, including shrubs, trailing, and low-growing.

These flowers produce berries, which are suitable for making pies or to snack on solo. However, avoid unripe berries, which can make some people and animals sick.

This plant has medicinal purposes, including treating skin conditions, respiratory problems, colds, fever, headaches, and indigestion.

If growing this plant in your yard, expect to see lots of attracted butterflies, hummingbirds, and bees, which can make lantana honey.

24. Lily

lily flower
  • Type – Perennial
  • Hardiness zone – 3-10
  • Sun – direct sunlight for six hours a day
  • Water – well drained
  • Soil pH – 6.5 to 7
  • Blooming season – early spring to late fall, depending on species.
  • Common names – Lilium
  • Flower shape – large solitary or clustered blooms with six petals that form a trumpet, bowl, star, funnel, or recurved (Turk’s cap) shape; three sepals and six long stamens in the middle. The inner flower is spotted or a different color than the rest.

Interesting Facts:

Over 100 species of lilies fall into separate divisions – true, American, Trumpet, Candidum, Aurelian, Martagon, Oriental, and Longiflorum.

Lilies are commonly used for centerpieces, cut flower arrangements, and bridal bouquets, and wedding decorations. Some cut varieties retain their pleasant aroma, which can fragrance a room.

25. Lily of the Incas

Lily of the Incas
  • Type – Perennial
  • Hardiness zone – 5-9
  • Sun – full or partial shade
  • Water – moist, well-drained
  • Soil pH – 5.5-6.5
  • Blooming season – mid to late summer
  • Common names – Peruvian lilies, Alstroemeria, Parrot Lily,
  • Flower shape – six petals, varying sizes depending on species; six curving stamens with a three-lobed stigma. Colors include orange, white, apricot, yellow, red, pink, lavender, and purple.

Interesting Facts:

Peruvian lilies are symbolic of devotion and friendship. They come in various colors and are a common flower to use for vase arrangements.

These flowers are sometimes called Alstroemeria due to Baron Von Alstroemer. The baron was a Swedish botanist who introduced these flowers from native South America to Europe in the late 18th century.

There are multiple varieties of lilies in all different colors. Some of the typical orange species include Bali, Flaming Star, Inca Joli, Inca Mambo, Inca Pulse, Inca Tropic, Indian Summer, Koncajoli, Moulin Rouge, Orange Gem, Orange Glory, Pacific Sunset, Perfect Orange, Princess Amina, Princess Sara, and Summer Breeze.

26. Lion’s Tail

Lion’s Tail flower
  • Type – Perennial
  • Hardiness zone – 8-11
  • Sun – Full sun, six hours of direct light each day
  • Water – well-drained; watered every three weeks
  • Soil pH – neutral
  • Blooming season – late spring to summer
  • Common names – wild dagga, lion’s ear, lion’s paw, wild cannabis
  • Flower shape- clusters of fuzzy tubular bright orange flowers on tiered whorls

Interesting Facts:

Lion’s tail has medicinal purposes of treating high blood pressure, asthma, headaches, and muscle cramps. It also contains psychoactive properties similar to cannabis.

This flower is a favorite treat of hummingbirds and butterflies. But it’s also useful as a snake repellent and is deer resistant. These plants grow fast, so they need regular pruning and deadheading for proper growth.

27. Marigold

Marigold flower
  • Type – Annual/Perennial in some climates
  • Hardiness zone – 2-11 (shorter lifespan in colder zones)
  • Sun – full sun
  • Water – moderate; water deeply once top 1″ to 2″ is dry
  • Soil pH – 6.2-6.5
  • Blooming season – late spring to early autumn
  • Common names – Ganda, Caltha, Gold bloom, Gols bloom, Holligold, Garden marigold, pot marigold, and Marybud
  • Flower shape – single or full double, with rounded heads and two-lipped or quilled florets. Small, circular with ruffled petals

Interesting Facts:

Marigolds are used medicinally to treat ailments like inflammation, ulcers, upset stomach, eye infections, menstrual issues, and a topical ointment for wounds. It’s also believed that marigolds can reduce fevers, particularly in children.

These flower petals are also used in salads and to make decorative garlands. Historically, boiling the leaves can produce food coloring and dye. In India, marigolds are offered to the Goddess and god on the Durga Puja.

28. Mexican Sunflower

Mexican Sunflower
  • Type – Annual/Perennial in zones 10 and 11
  • Hardiness zone – 9-11
  • Sun – full sun or partial shade
  • Water – low; drought-resistant and harmed by humid climates. Dry soil completely before re-watering
  • Soil pH – 5.8-6.5
  • Blooming season – summer to the first frost
  • Common names – Tithonia diversifolia, tree marigold, Japanese sunflower, Mexican tournesol, Nitobe chrysanthemum
  • Flower shape – sunflower looking flower heads with yellow centers, 7 to 15 ray floret petals with three teeth on the tips. Each flowerhead holds 80 to 120 tiny flowers in the center.

Interesting Facts:

Mexican sunflowers form live fences and for ornamental looks, but they are a globally invasive species and listed as a noxious weed in South Africa.

These are heavily nectared and attract honeybees, bumblebees, hummingbirds, butterflies, moths, and multiple types of birds. Mexican sunflowers are a great addition to backyard bordered flower boxes and butterfly gardens when kept contained.

29. Nemesia

Nemesia flower
  • Type – Annual/Perennial in 9-10 zones
  • Hardiness zone – 2-11
  • Sun – at least six hours of full sun
  • Water – regular watering/moist soil
  • Soil pH – 5.5-6.5
  • Blooming season – late spring to the first frost
  • Common names –
  • Flower shape – similar to orchids, the top four petals make a fan with a large lobed petal underneath in the shape of trumpets.

Interesting Facts:

These plants are native to South Africa, and many species are listed as weeds due to their growth in the disturbed ground where they’re unwanted.

30. New Guinea Impatiens

New Guinea Impatiens
  • Type – Annual
  • Hardiness zone – 10-12
  • Sun – Full sun/partial shade
  • Water – well-draining loose soil, regular watering
  • Soil pH – 6.0-6.5
  • Blooming season – continuous
  • Common names – jewelweed, snapweed, touch-me-not, patience, impatiens
  • Flower shape – five large petals, heavily nectared

Interesting Facts:

Tango is a variety of New Guinea Impatiens that produce stunning fluorescent orange flowers. They do best in temperatures between 70 and 85-degrees during the day and are not cold hardy. You have to wait until after the last frost before planting outside.

31. Orange Columbine

Orange Columbine flower
  • Type – Perennial
  • Hardiness zone – 3-9
  • Sun – Full to light shade
  • Water – regular watering in well-drained soil
  • Soil pH – neutral
  • Blooming season – spring to early summer
  • Common names – Granny’s Bonnet
  • Flower shape – bell-shaped with long spurs that are longer than the petals

Interesting Facts:

There are over 70 different species of Columbine, one of which is the Orange Columbine. They are resistant to deer but attract bees, hummingbirds, moths, and butterflies.

Native Americans used crushed seeds and roots for sore throats, headaches, and heart problems. They also used them for love charms.

32. Orange Coneflower

Orange Coneflower
  • Type – Perennial
  • Hardiness zone – 4-8
  • Sun – Full to light shade
  • Water – consistent water until established, then more drought resistant
  • Soil pH -5.6-7
  • Blooming season – midsummer to fall
  • Common names – Black-eyed Susan, Goldsturm,
  • Flower shape – 3″ slightly curved drooping or overlapping petals with toothed apex, brown or copper cone center

33. Orange Wallflower

Orange Wallflower
  • Type – Annual
  • Hardiness zone – 6-9
  • Sun – full to partial sun
  • Water – water once a week, more during dry seasons
  • Soil pH – 7.0-9.0
  • Blooming season – spring through autumn.
  • Common names – Western Wallflower, Erysimum capitatum
  • Flower shape – clusters of four-petal 1″ flowers

Interesting Facts:

The Wallflower got its name for the flower’s frequency of growing on masonry fences, walls, and stone. The Western variations of the Wallflower have more dramatic colors.

European folk medicine used wallflowers for bronchial congestion, while American Indians used the leaves or seeds to make tea to relieve stomach cramps.

34. Pansy

Orange Wallflower
  • Type – Annual/Perennial/Biennials
  • Hardiness zone – 6-11
  • Sun – Partial morning sun, shade in the afternoon
  • Water – 1″ a week
  • Soil pH – 5.4 to 5.8
  • Blooming season – spring through early summer; some repeat growth during fall; through the winter in zones 7 and warmer
  • Common names – violet, violaHeartsease, Love-in-idleness; Johnny-jump-up
  • Flower shape – thin, delicate rounded petals that look like a face due to the different colored markings. Grows in a range of bright colors and mixed blends

Interesting Facts:

The name pansy comes from pensée, a French word meaning thought. It got this name because the petals have facial characteristics and often nod forward as if deep in thought.

35. Penstemon

Penstemon flower
  • Type – perennial
  • Hardiness zone – 5-9
  • Sun – Full sun
  • Water – low water needs (10″ to 30″ annually)
  • Soil pH – 5.8 to 6.2
  • Blooming season – late spring to early summer
  • Common names – Penland’s beardtongue, Penland penstemon, Pineleaf Penstemon
  • Flower shape – narrow tubular

Interesting Facts:

Several hundred different types of Penstemon plants of varying sizes, blooms, leaves, shapes, and sizes.

36. Pincushion

Pincushion flower
  • Type – Annual
  • Hardiness zone – 3-7
  • Sun – full
  • Water – well-drained, water once a week, twice during droughts
  • Soil pH – 6-7.5
  • Blooming season – spring until the first frost; heaviest in May
  • Common names – Scabiosa, Scabious,
  • Flower shape – protruding stamens from the center of the round buttons, rosette in form, fragrant blooms

Interesting Facts:

There are over 30 species of pincushion flowers, both perennial and annual. This herb is a member of the honeysuckle family.

37. Poppy

Poppy flower
  • Type – Annual
  • Hardiness zone – 3-7
  • Sun – full
  • Water – low, between 10″ to 30″ a year
  • Soil pH – 6.5-7.0
  • Blooming season – late spring into early summer
  • Common names – varies by species.
  • Flower shape – four petals, varies in look and size.

38. Ranunculus

Ranunculus flower
  • Type – Perennials
  • Hardiness zone – 4-10
  • Sun – full
  • Water – well-drained, moderate watering
  • Soil pH – 6-6.5
  • Blooming season – spring
  • Common names – buttercup, butterose, crazy weed, gold cup, field buttercup, blister plant, upright meadow crowfoot, tall field buttercup, tall crowfoot
  • Flower shape – one to four blooms per stalk, semi-double or fully double, 3″ to 5″ width, dark cone center,

Interesting Facts:

There are over 600 species of Ranunculus genus. Symbolisms of this flower include charm, attractiveness, and careless behavior.

39. Rose

orange rose
  • Type – Perennial
  • Hardiness zone – 3-10, depending on species
  • Sun – six to eight full hours of sunlight
  • Water – 2″ a week
  • Soil pH – 6-6.5
  • Blooming season – mid-spring to autumn
  • Common names –
  • Flower shape – wild roses have five petals, while cultivated have up to ten; vary in size and color

Interesting Facts:

There are over 300 species and thousands of cultivars in the Rosa family, including many categories. Roses can grow as bushes, shrubs, trailing or growing up structures, thornless, and miniature.  

40. Snapdragon

Snapdragon flower
  • Type – Annual/Perennial depending on location
  • Hardiness zone – 5-8
  • Sun – Full sunlight or some shade
  • Water – 1″ a week
  • Soil pH – 6.2-7.0
  • Blooming season – spring until the first frost.
  • Common names – dragon flowers
  • Flower shape – 3.5cm to 4.5cm, flowers with two lips; forms clusters of 8 to 30 short flowers with a different colored crown

Interesting Facts:

The snapdragon got its name due to the flower’s similarities to a dragon face. When you squeeze the flower, it looks like the dragon’s mouth opens and closes.

41. Strawflower

Strawflower
  • Type – Annual
  • Hardiness zone – 8-10
  • Sun – full
  • Water – well-drained, medium moist
  • Soil pH – 5.5-6.5
  • Blooming season – spring through fall.
  • Common names – everlasting flower, golden everlasting, paper daisy, everlasting daisy
  • Flower shape – crisp petal bracts, which are dry, dead tissue. Tiny florets in the dense center disc are the actual flowers. These can be a different color than the bracts. 1″ to 3″ head

42. Tiger Lily

Tiger Lily
  • Type – Perennial
  • Hardiness zone – 3-9
  • Sun – full but can tolerate partial shade.
  • Water – deep watering once a week
  • Soil pH – 5.5 to 6.0
  • Blooming season – early summer to autumn
  • Common names –
  • Flower shape- bright orange flowers with crimson or black streaks. Thin stamens with colored tips protrude from the center. Leaves curl backward with pointed ends.

Interesting Facts:

The Tiger Lily gets its name due to the black marks along the leaves’ inside, which look like the pattern of a tiger’s coat.

43. Torch Lily

Torch Lily
  • Type – Perennial
  • Hardiness zone – 5-9
  • Sun – full
  • Water – moderate
  • Soil pH – 6.6-7.0
  • Blooming season – spring through fall.
  • Common names – red hot pokers, Kniphofia, tritomea,
  • Flower shape – tall multicolored spikes that form in clusters

Interesting Facts:

Despite the name, torch lilies are not a lily. They got their name due to their resemblance to torches and the leaves’ resemblance to lily leaves.

44. Trumpet Honeysuckle

Trumpet Honeysuckle
  • Type – Perennial
  • Hardiness zone – 4-9
  • Sun – full sun but can tolerate shade
  • Water – well-drained, moist soil
  • Soil pH – 5.5 – 8
  • Blooming season – summer to fall
  • Common names – coral honeysuckle
  • Flower shape – trumpet tubular-shaped flowers produced in clusters on climbing vines

45. Tulip

orange tulip
  • Type – Perennial but sometimes annual
  • Hardiness zone – 3-8
  • Sun – Full without direct sunlight during hottest hours
  • Water – ⅔” water a week
  • Soil pH – 6.0-7.0
  • Blooming season – early to mid-spring; only blooms for one to two weeks
  • Common names – Tulipa
  • Flower shape – large, showy, opening into a cup shape before widening open, so the petals curl back, revealing the colored stamens; can be solid or multicolored.

Interesting Facts:

The name tulip is believed to have come from the Persian word, translating to turban, due to their shape. Although beautiful, tulips do not stay in bloom long.

46. Zinnia

 Zinnia flower
  • Type – Annual
  • Hardiness zone – 3-10
  • Sun – full sun but tolerates afternoon shade in hot climates.
  • Water – well-drained soil, 1″ of water a week
  • Soil pH – 5.5 to 7.5
  • Blooming season – summer to fall
  • Common names – common zinnia, elegant zinnia, youth-and-age, Zinnia violacea
  • Flower shape – single row or domed shape flowers, with colored center surrounded by colored stamens. May all be the same color or varying

Interesting Facts:

Zinnias belong to the sunflower species, which is part of the daisy family. This species makes excellent cut flowers for bouquets or centerpieces and lasts longer after removed from the stalk.

Conclusion

We hope you’ve enjoyed this extensive collection of different species of orange flowers. Nature sure knows how to give us a show, and these 46 flower types steal the spotlight. Now that you’ve seen the various classifications, you’re ready to incorporate these into your landscaping plans. Happy growing!

10 Best Free Virtual House Paint Visualizers

Visualizing the color of your home’s exterior is a challenge. It can be a struggle to imagine which colors match and what the overall effect will be.

Don’t panic! There are plenty of exterior house color visualizers free to use, which gives you more of a chance to be creative. Seeing your home’s exterior in all its color glory before you lift a finger is a great way to reach your goals.

We bring you the 10 best free virtual exterior paint visualizers.

1. Benjamin Moore’s Personal Color Viewer

First, even though Benjamin Moore’s Personal Color Viewer is free, you still need to sign up to get the benefits of the software.

It offers sample rooms to inspire you, where colors can be mixed and matched, or you can upload an image and work with that instead. Once you have your room uploaded, you can start to create a maximum of 5 zones.

You’ll need to ensure your image is set to 1,200 px x 1,200 px to get the most from the program. Once you are happy, you can apply the paint in various ways, using either a paintbrush, a magic wand, or a shape tool.

You can then insert the colors into the zones you have chosen to give you the best idea of how the colors will work in the room. Furthermore, you get a detailed report telling you which colors complement each other.

You can even adjust the opacity to enhance your designs further. Plus, this software is easy to use, so it should be a breeze for beginners.

On the downside, if your picture doesn’t match the 1,200 px x 1,200 px requirements, you will have issues uploading your image.

Pros

  • Create zones.
  • Sample rooms.
  • Opacity adjustment.
  • Different color tools.

Cons

  • Uploading images can be a challenge.

2. Sherwin-Williams ColorSnap ® Visualizer for Web Software

Sherwin-Williams is an excellent piece of software if you are new to exterior and interior design. It gives you suggestions to make the task easier. A helping hand is always welcome when there are millions of color choices.

Like all good virtual house paint visualizers, you get the choice of room templates to spark your creative juices, or you can upload images from your home. You can also create zones where you can add your color selections.

Like the Benjamin Moore program, you apply color using a paintbrush, a magic wand, or a zone selector.

This software is pretty hard to beat for color choices and expert themes, especially if you don’t know where to start. Choosing the expert option is a handy starting point. Plus, you can adjust the camera angles to see how your color selection looks from different views.

Pros

  • Color tool choices.
  • Great for beginners.
  • Expert color themes.
  • Different camera angles.

Cons

  • Takes time to learn.

3. Valspar Virtual Painter

Valspar is Lowe’s house brand of paint, so if Lowe’s paint selection is a favorite, you will love this virtual painter.

The beauty of this software is the ability to mix and match the elements within the image. You can have accent walls, change the color of covered entrances on the exterior, and even add furniture that matches the scheme.

If you get stuck, you can opt to get advice from an expert, and once you upload your image, the software creates a palette similar to your existing color choices. You can even adjust the shade to get the exact color match.

Another advantage of this software is the sheer availability of the paint. Lowe’s has over 2,000 locations across the country increasing your options to purchase the right colors. Plus, it is great value for money.

It isn’t the easiest program to work with, but once you get the hang of it, you will have your home’s exterior and interior looking their best. You can even order your color selection online, straight from the software.

Pros

  • Order paint online.
  • Widespread availability of paint.
  • Shade adjuster.
  • Get expert advice.

Cons

  • Tricky to master.
  • Only for Lowe’s products.

4. Cloverdale Paint Colour Visualizer

If you want your home exterior to make a statement, this might be the paint visualizer software for you. Cloverdale uses bold brush strokes and has an array of vibrant colors to choose from.

The first thing to note is you don’t have to sign up to use this program. You can upload your images and get started right away, or you can use their sample templates and tweak them.

This package is one of the easiest to use, and you get results pretty quickly, making it satisfying to work with. It’s also ideal for beginners looking to flex their creative muscles for the first time.

You get a choice of thicker brushes to paint the exterior and interior of your home more rapidly, and you can change the opacity to get a feel for how well the color scheme works in different shades and light conditions.

Once you have finished designing, choose different camera angles to see your creation from every view.

It feels a little unrefined, thanks to the bold brush strokes, and unless you are skilled in virtual painting, the colors can overlap. It also lacks any color themes, which are helpful to kickstart your designs.

Pros

  • User-friendly.
  • Easy to learn.
  • Bold brush strokes.
  • No sign-up necessary.

Cons

  • No color themes.
  • Feels unrefined.

5. Behr® Paint Colours

Behr® is slightly different because rather than focus on an individual color scheme for your home’s exterior and interior, it gives you multiple options. It makes color choice simpler and gives you a better understanding of how the colors work in your chosen space.

This software is easy to use, making it much more user-friendly than some. You can play with the color options, select samples based on similarity to your home, and then click on the image to import your color choices.

This software is similar to Lowe’s visualizer in that it links to a major DIY store brand. When you click the store locator, Home Depot’s logo appears.

You might notice there is no facility to upload images of your home, limiting you to pre-selected templates that best match what you have. This is a significant downside compared to other visualizer software.

Pros

  • Easy to use.
  • Multiple color options.
  • Pre-selected images.
  • Saves time.

Cons

  • Linked to Home Depot.
  • No image upload.

6. Rodda Color Visualizer

Rodda is versatile, offering you the option of using existing images, sample images, or uploading new ones. You can even choose various types of floors to get you started on the design.

This software is fast, saving you time and enhancing your user experience. Plus, you don’t need to use a zone selector, and you can add colors directly to the walls, floors, and ceilings.

The end result is you get a detailed visualization of your design in double-quick time and with the minimum of fuss.

The extensive selection of pre-loaded samples covers almost every room configuration and exterior appearance you can think of. Still, if you want to make changes, just outline the zones or use the magic wand.  

Now for the not so good; to use this software, you need to create an account and share your details. Some people may prefer other options rather than give out this information.

Pros

  • Versatile.
  • Speedy operation.
  • Extensive list of samples.
  • Works with or without a zone selector.

Cons

  • Needs an account set-up.
  • Requires personal information.

7. Room Visualizer by Glidden

Unlike Rodda, to use this software, all you need to do is agree to their terms and conditions. Then you can access a bank of images or upload your own.

This program gives a clear visualization straight off the bat. You can select from a wide choice of colors and import them to pre-loaded templates of rooms, or take a photo of your space to work with.

If you know what colors you want, search for them by name on popular sites like Amazon, Walmart, and Home Depot to get the exact color match. Plus, you can adjust the hue to create variations for the best results.

The software makes comparisons for you to help with your color choices. Once you are satisfied with your design, you can order the colors online for the best possible match.

The strength of this program is in the detailed images. They are presented in brilliant clarity, giving you the highest quality render of any of the software on offer.

You cannot rush with this software because it takes time and patience to master. But, once you do, you will have a world of possibilities at your fingertips.

Pros

  • High-quality images.
  • Order online.
  • Tons of images.
  • Compare shades.

Cons

  • Challenging to learn.

8. Visualize Color by Dulux

We all know Dulux. It is a well-known paint brand, so moving into color visualization software is a natural step. Dulux has a vast array of color choices, so if you want to increase your paint options, this is a great tool.

You can select from their templates or upload your new image and then choose from their website to find the right color combinations.

If you have a particular color shade in mind, you can search by name on their website, or get color suggestions based on other user input.

You need to save your color palette before progressing to the decorating stage, and if you don’t like how the exterior looks, press the reset button and start over.

At the end, you can click the “Review” tab to get a comprehensive inventory of the colors you have used, and then you can place your paint order with Dulux.

If you want to garner opinion, share your designs on social media to gauge reactions. You might find by doing this you get more suggestions to improve your exterior further.

Be aware that digital rendering of paint colors may vary from the physical paint you choose, so be sure to exercise caution before finalizing your order. Plus, to save your designs in JPG format, you need to create an account.

Pros

  • Online ordering.
  • Vast color choice.
  • Saves in JPG.
  • Share designs on social media.
  • Reset and review buttons.

Cons

  • Physical colors may vary.
  • Need an account to save designs.

9. McCormick Paints Color Visualizer

McCormick Color Visualizer is extremely popular with users, thanks to its functions and upgrades that keep it current in the field of visualizer software.

You can choose from residential and commercial images, as well as exterior shots. The program gives you suggested pictures, or you are free to upload new ones.

Once you choose the color you like, the website suggests other color options it thinks will compliment your scheme. This helps if you have no clue about matching colors or you are new to this technology.

If you don’t like the suggestions, you can select your own colors, and if you change your mind, you can wipe the changes and start from scratch.

When you do find a design that meets expectations, you can save images in JPG format, which makes them easy to share on social media.

Like all new experiences, it takes time to get used to how this technology works. Don’t rush it, and ask someone for advice if necessary.

Pros

  • Saves in JPG format.
  • Vast sample images.
  • User-friendly.
  • Color suggestions.

Cons

  • Takes patience to master.

10. Home Stratosphere’s Paint Visualizer Software

This visualizer software is super-easy to use. You can upload an image or choose to work from templates. The colors are simple to apply, and you even get to see what the colors look like when the paint dries.

You can change the opacity to adjust to the shade you want, and you get to choose from the vast Behr range of paints.

There is nothing to download, and you can get started straight off the bat. Infilling with the magic brush is much faster as it colors larger sections of the walls and floor, but you also get a smaller, detailed brush to help keep within the lines.

You can share your work on social media, plus you can take a photo and print out the designs.

There are no instructions or pointers to help you master the software, so it’s a case of trial and error, and unless you upload a new image, you are limited to their room designs.

Pros

  • Easy to use.
  • No download needed.
  • Share on social media.
  • Opacity Adjuster.

Cons

  • No instructions.
  • Feels basic.
  • Limited templates.

Painting Without The Mess

There is no better way to get a handle on your ideas and designs. Free virtual home paint visualizers give you the tools, the control, and inspiration to see your ideas blossom.

You can choose the color schemes that suit your home, adjust the shade, and even add furniture to create the final vision. All of this and without opening a single can of paint!  

22 Best Online Deck Design Software Programs (Free and Paid)

Who doesn’t love a deck? Whatever the shape of your yard, a deck adds something special to the overall look of your space. But where do you start when choosing a design?

That’s where online design software comes into its own. The best deck design software lets you visualize your dream deck to see how it looks, what stain to choose, and whether it meets your expectations.

Best Deck Design Software (Free)

Let’s focus on the best free deck design software first.

Decks.com Deck Designer

Decks.com has a vast list of deck plans, so choosing the right design should be a breeze. The graphics are okay, but nothing to get excited about. It also runs a little slow, which impacts your designing experience.

Comparing this to other free online software, it ranks as adequate for the task, but nothing better.

TimberTech Azek Deck Designer

Launched in 2017, TimberTech’s design software is tour de force. It has great graphics, tons of templates and designs, and 3D immersive imaging to give you a sense of how it will look.

You can choose your design, get an inventory of the tools required to complete the job, and even get an order list of the materials, as well as hints and tips. It is one of the best free tools out there for deck design.

Trex Deck Design

This software puts you in the driving seat. You can choose your dimensions, the layout, the design, and the materials you need to construct your deck. You can also download the mobile app for designing on the go.

Once you finalize your design, you get all the information you need to make it a reality. You can even order sample boards to see if your choice of colors matches your space.

You get access to the Trex literature library, where you can download everything from installation guides to deck lighting and technical information.

The only downside with this program is its dedication to Trex products. You don’t get any other choices.

BigHammer

This is a one-stop-shop for all outdoor design needs. You can choose from over 70 deck templates, print off a list of everything you need down to the last screw, and even place your deck into a picture of the exterior of your home.

The imaging is sharp, you can download it with a single click, and it gives you countless options.  Once you’ve finished creating your deck, you can turn your attention to the fencing or even a new garage.  

Bear in mind that BigHammer only works with Internet Explorer.

SketchUp Deck Design Software

SketchUp is simple to use, requires no previous skills, and comes with zero strings attached. They have a large help section, should you get stuck, and it works well with your laptop and tablet.

This software is commonly used in professional settings.

SketchUp has a paid subscription service called Pro, where you can access more designs and have greater control of the design process. SketchUp free remains a firm favorite with users thanks to its simplicity.

Lowe’s Deck Designer + Planner

Get started with this Lowe’s software. It gives you templates, colors, material, railings, and much more. You can even schedule a conversation with a decking expert should you get stuck.

Once you’ve completed your design, Lowe’s provides you with a comprehensive list of everything you need to complete the project. You get a cost estimate, a materials list, 3D rendering, and building plans.

It’s available for Mac and Windows, so make sure you check for compatibility before you download the software.

The Home Depot: Do-it-Yourself Deck Designer

The Home Depot software is identical in every way to the BigHammer Do-It-Yourself deck design package. The only thing that differs is the logo on the screen.

It has a fencing designer, a garage designer, and a post frame designer, so you don’t need to look elsewhere to complete your garden projects.

To run this program, you will need a minimum of 4G of hard drive space.

MoistureShield Dream Deck Designer

With this software, you can dream it, design it, and build it. You can mix and match color options to harmonize with your indoor flooring and your sidings, as well as choose the materials and textures.

MoistureShield specializes in composite decking rather than wood, but it does give you a ton of options, and you can get creative with your designs. You can estimate the costs, find a supplier and contractor, and order sample boards.

This software is only available in Windows and requires a minimum of 64 MB of free memory space.

Menards Deck Estimator

Menards Deck Estimator will allow you to create 3D designs on any computer. The software creates a list of materials needed and a cost calculator. You will need to download this program, which requires a Java application.

Fiberon Deck Visualizer

Like Trex, Fiberon has created a deck design tool dedicated to Fiberon products, so if you are looking for variety, try something else. You can create as many deck designs as you want, store them, and come back to make modifications.

The completed design will include a 3D plan and materials list, an installation checklist, and a list of local Fiberon suppliers near you. For the best results, use Safari, Chrome, Firefox, or Edge browsers.

MiTek Deck Designer

It doesn’t matter if you are a beginner or an industry professional; MiTek Deck Designer is suitable for you. Create designs, upload images of your home’s exterior to design the deck accurately, and get checklists and a stock check of materials.

You can also collaborate with others on your design and share the results with the world. There’s even a blog to get inspiration and ideas.

Simpson Strong-Tie Deck Planner

Simpson Strong-Tie is a leader in structural wood connectors, so it stands to reason they have a free design package to sell more products. You can design in 2D or 3D, choose from existing templates, and get tutorials on creating.

You can select from a library of furniture, windows, doors, and plants, and use the deck-shaping tools to create any dimension you desire. Once you are done, you can save your project and return to it later for last-minute tweaks.

USP Structural Connectors

This software was tricky to load. So much so that it took three attempts without success. Like Simpson Strong-Tie, USP is in the business of shifting products. This free program allows you to design, inventory, and find suppliers near to your locality.

The download issues might dissuade many from using this software.

BHG Deck Designer

This package lets you create your goals, set a budget, and create designs. If you are stuck for inspiration, you can reach out to design pros for hints and tips.

Better Homes and Gardens provide you with an endless vault of design ideas and never-ending content to refer back to.

Best Deck Design Software (Paid)

It’s time to find out what you actually get for your money with paid-for deck design software.

Idea Spectrum

Idea Spectrum is a complete exterior and landscaping design software that allows you to build entire gardens, decks, jacuzzis, and swimming pools to redesign your exterior space.

It comes in various options, from the Plus package at less than $100 to the Premium that retails closer to $400.

This program runs on Windows 64-bit and requires a minimum of 4 GB system memory.

Chief Architect

Chief Architect is available for both Mac and PC, so make sure you download the correct software. For less than $100, this design package is excellent.

You can access a vast stock of objects that include garden furniture and plants to give you an immersive experience. You can view your design from multiple angles; plus, it lets you draw your home in CAD-style.  

Choose from shapes and text boxes, plus, it even helps you select garden plants that attract bees and butterflies. And when you’ve designed the deck, you can get started on the rest of the house.

This program takes a little practice to get used to, but it is invaluable once you master how it works.

Punch! Landscape Design Software

Punch! Software is relatively easy to master because it uses drag and drop to help you place your decking and furniture. Besides the landscaping options, you also get kitchen designs and exterior remodeling templates.

You can run this software on Mac or PC, and given the large array of design options, it is surprisingly affordable compared to some. You even get a bonus pack as part of the deal.

SmartDraw

Even though SmartDraw has been around for 25 years, it has evolved to keep pace with the fast-changing tech world.  It is a stalwart of public, private, and Fortune 500 companies.

You get templates for your exterior; plus, it is packed with symbols and objects that help create a classic deck and outdoor space. It’s also useful when designing interiors, home remodels, and individual rooms.

This software includes professional designs that you can access to give you further inspiration, and you can draw and print your designs on any scale. You also get the choice of residential and commercial floor plans.

This program has over 4,500 templates and 34,000 images and symbols to help you design; however, you do pay a premium for this service.  

If you click the “Try it for free” button, you can access a free version with scaled-back features.

Structure Studios VizTerra

VizTerra offers an interface with intuitive design tools and an extensive stock of images and symbols. You can draw in 2D, and with the click of a button, watch your ideas transform into 3D.

You can hone your design and then share your ideas, either as a presentation or on social media to gauge reactions. Simply drag and drop the elements you want to build your deck, And when done, take a virtual reality walk through your design like you are actually there.

You can even watch as day turns to night and all the extra features like deck lighting come alive.

Sketchup Pro

SketchUp comes in four paid options:

  • Shop: The cheapest yearly subscription charge at $119.
  • Pro: Double the annual price of SketchUp Shop at $229.
  • Pro Classic: A one-off payment of nearly $700.
  • Studio: This will set you back almost $1,200.

SketchUp Pro does everything the free version does but with added extras. Trimble Inc acquired SketchUp from Google in 2012 and has since expanded the features and updated the software to keep it current.

You can create 2D designs and then translate them to 3D and use VR to enhance the viewing experience. You also get unlimited Cloud storage via Trimble Connect.

The possibilities with this software are unlimited. This is 3D modeling at its best.

Planner 5D

There is a free 30-day trial version you can get, but you will need to pay if you want to get the most out of the software.

You get 2D and 3D designs tailored for those without architectural experience, and you can start with a single-story home, adding your decking as you progress.

You also get thousands of design elements and excellent tutorials to help you get the most from your investment. Planner 5D is available for Android and iPhones.

CadPro

With CadPro, you get a library of deck plans available for home and commercial properties and a comprehensive features list that includes a tool overview, draw and edit, and PaintPro Plus.

You can choose from blueprints or a library of deck templates to speed up your designs, or you can draw from scratch.

CadPro is a professional designer’s dream thanks to the technical nature of the way the software works, but it isn’t the most user-friendly. For this reason, if you have limited architectural or engineering knowledge, it might be better to steer clear.

On the plus side, you can start subscribing for just under $100, making it one of the better value programs available.

All Hands On Deck

Designing your new deck may seem like a simple task, but in reality, it takes a degree of technical knowledge that most of us lack. That’s why free and paid deck design software makes our lives easier.

If you want to visualize your dreams before committing money, do yourself a favor and check out any of the deck design software featured. It could be your next smartest move.

32 Best Online Home Interior And Exterior Design Software (Free & Paid) – The Home Simple

Home remodeling and design costs can add up rapidly. Whatever your plans and the amount of remodeling you want to do, you need to have a handle on the situation or the numbers will escalate out of control.

Exterior house design software helps you build your ideas into a format that you can visualize before it becomes reality. Unless you have architectural or construction experience, this is an ideal way to keep a grip on the concept and the costs.

Let’s take a look at the best exterior house design software that’s free to use online.

Free Exterior House Design Software Options

Home Dedicated Interior Design Software

This is the one-stop-shop for all things design. You can choose from their templates of a single-story and double-story home, and even 3-room apartments. It gives you 3D clarity to immerse you into the design to get a handle on what your dream home could look like.

Planner 5D

Planner 5D offers interior and exterior 2D and 3D designs, tailored for those without any construction or architectural experience. You can start with a single-story home and then add floors to create your design.

It is excellent at teaching you to get the most from the software, and it provides you with thousands of design elements to get you started. Planner 5D is available for Android and iPhones.

Planner 5D is only free for 30 days, and you do not get access to some of the advanced design elements. After the trial period, you pay a subscription either monthly or yearly, which unlocks the software’s premium features.

HomeStyler

Homestyler is a 2D or 3D platform that lets you design your house from scratch or upload an existing floor plan as a template to work with. It is simple to use, thanks to the drag and drop system, making it ideal beginner’s software.

Users can upload and share their designs on the gallery page to spark creative juices, and you can opt for the free service or the premium subscription. Because it’s web-based, you can use it without the need to download anything.

RoomToDo

RoomToDo is a Ukrainian based software, so don’t be alarmed when you open the page and see Russian. Simply hit the “translate page” button, and it appears in English.

As with most software, RoomToDo offers a free service and a paid subscription, so you can choose which is best for you. This software is also available as a mobile version to keep you designing on the go.

You can upload 2D floor plans or design in 3D, adding windows, doors, and other exterior elements as you progress. It allows you to see interior and exterior shots of your home, creating an immersive experience.

Space Designer

Space Designer allows you to switch between 2D and 3D. You can sketch your floor plan and create your home, then view it in 3D. It even lets you adjust the lighting, camera angles, and move 3D furniture in or out.

Again, it is web-based software, so there is no need to download anything to your computer.

It has a “casual user” section and a space dedicated to professionals, as well as a help page and a blog to get as many tips and hints to help you create.

HomeByMe

HomeByMe allows you to draw your designs in 2D and then create your home in 3D. It has online tutorials for those unfamiliar with how it works, and you can view other people’s images and designs to get inspiration.

If you don’t have the time or skills to convert your existing floor plan, you can upload it, and HomeByMe will convert it for you. This software needs to be downloaded to use it.

Small Blue Printer

Small Blue Printer is a floor planner, house, room, and garden designer in one. It offers 3D imagining, hundreds of design elements, and templates. Plus, it enables you to work on large-scale projects like designing your new home.

You can use this software instantly because it is download-free.

RoomSketcher

RoomSketcher is an app-based software that lets you perform basic functions like creating floor plans and architectural designs, but if you want to unlock the advanced features, you will need to subscribe to the premium service.

They also offer a floor plan design service, or if you want, you can upload your sketches and work from that as a template.

Olympic Paint Color Visualizer

You can upload images of the exterior of your house and visualize the colors. It even lets you apply wood grain and other sidings to get a feel for how your home looks. It’s the easiest way to color coordinate your windows, doors, and walls.

IKEA Home Planning and Room Planner

This software was developed initially as a tool for designing your home around IKEA furniture and products. It has evolved into a fully-fledged design package that helps you create complete homes from the ground up.

The software is free, but you do have to install it to use it.

MyDeco 3D Room Planner

If you need to learn the ropes, MyDeco 3D Room Planner is a great piece of software. It is web-based, so there’s no need to download anything, and once logged in, you can access all of the services.

It is packed with great tutorials to give you all the hints and tips you need to get the most from the package.

Lowe’s Virtual Room Designer

Lowe’s is a free piece of software that lets you choose room and exterior designs from templates, or create your own unique image. The graphics are second to none, although it has limited capabilities.

Again, it’s a web-based package, so no downloads, and you can easily create an account and save your designs.

Decolabs

Decolabs is an iPad app that lets you photograph your room, upload it, and then choose furniture to make up your ideal space. This is a white-labeled app, which means that retailers get product placement.

The upside is that you can design and shop at the same time.

DreamPlan Home Design Software

You can use this software to work in 2D and 3D to design rooms, exteriors, and even gardens from the ground up. You can create custom floor plans for your house, apartment, or condo and start right away.

This software is only available for Windows OS, so make sure you check for compatibility first.

Provia Visualizer

Provia Visualizer works by uploading your designs or selecting one of their custom homes to add your own touches. It’s web-based software that is so easy to use. Simply hover your mouse over the house image and select the windows, doors, and sidings.

You can choose variations of each element to suit your taste and upload an image of your home as a template.

Menards Design-It-Center

This is app-based software, designed to complement the range of products and services available in store. It has a roof estimator and a sidings and color visualizer. It also has a complete range of gutterings, fascias, windows, and doors available to purchase, plus many more.

The app is available as an Android and Mac download. You are limited to what you can visualize with this software.

Alside

Alside is another web-based software, developed to give you a better understanding of their range of sidings. The sidings visualizer lets you see what looks best on your exterior.

There are color palettes, “view your own home” buttons, and blog posts to inspire you.

DreamDesigner

DreamDesigner is another web software that you can access without downloading anything. If you want full access to all its benefits, you need to create an account to save your projects.

You can email an image of your home to the team, and they will digitally map it and email it back to you. Then you can start visualizing the exterior of your home using different sidings and fascias, as well as roof shingles, trim, doors, and windows.

CertaPro “My Paint Colors”

CertaPro is another product-linked design software. It allows you to choose from the range of CertaPro paint colors, see how the exterior of your home looks, and then book for an estimate to cost the work.

If you wanted to get an idea of how the colors match, you could use this as a stand-alone tool without the need to hire the CertaPro team. It is limited to exterior design only, but you get a wide choice of exteriors, colors, and materials.

Alure Home Designer

Alure is a provider of sidings and other exterior products for your home. The software is designed to enhance your shopping experience by selecting the virtual products to try before you physically buy.

It isn’t as advanced as other software, and it has limited capabilities, but if you want to see how your home would look with new sidings, give it a whirl.

Champion Windows Designer

Customize your home’s exterior using either a photo uploaded as a template or one of their stock images to work on.

Once you upload the picture, you can choose from windows, doors, sidings, trim, and roof shingles.

Window World Visualizer

As you might have guessed, Window World is a window and siding company, so their visualizer software complements their range of sidings and materials. It is a bit on the basic side, but you do get an image of how your home will look.

Giving the user options to change colors would improve the software. At the moment, you are restricted to their choices.

Hoffman Weber House Design Software

This Hoffman Weber software is slow to load, but once it does, you have multiple options to enhance the exterior of your home.

You can’t upload an image of your home, but you can trawl through preselected templates to find one that best matches. If it involves the exterior of your home, this software has the lot.

It almost rivals fee-paying software for colors, designs, and options.

GAF Virtual Home Designer

GAF Virtual Home Designer allows you to upload your home’s image or choose from one of their designs in the online library. GAFs primary function is to help you choose your new roof, and it is linked to all of the products available from their online store.

You can even find a contractor to carry out the work when you settle on the one you want. One of the best features is that it suggests color and complementary matches to enhance your home’s appearance.

This software is good, but it does run slow.

Eldorado Stone

Eldorado Stone supplies stone and rock veneers for the interior and exterior of your home. The visualizer helps you navigate the style and finish you want by offering you creative ideas and mood boards, as well as interior and exterior templates to work from.

The whole concept links to selling their products, but it is still useful as a free bit of software. It only allows you to design the sidings of your home, so it is a little restrictive. It also excludes doors and windows.

Paid Exterior House Design Software Options

Home Hardware Design Centre

This online software allows you to start from scratch or work from preselected designs and templates. You can browse the many hardware products they have available in-store and use them to build your dream home.

SmartDraw Interior Design Software

SmartDraw has been around since the mid-90s but has evolved with the times. Public and private sector institutions love this software, as well as some Fortune 500 companies.

SmartDraw includes templates for your interior and exterior, and it is packed with symbols and objects that help create an inviting home. It is great for interior design, home remodels, and individual rooms.

Thanks to its professional fan base, designers and programmers have contributed unique designs for you to access. You can draw and print on any scale and choose from residential and commercial floor plans.

You pay a premium for this service, but this software has zero affiliate links, making it less crowded and more user-friendly.

With over 4,500 templates and 34,000 symbols and images, the paid package is comprehensive. You can access a free version by clicking the “Try it for free” button, but it only gives you access to the basic version.

Cylindo

Cylindo works with top furniture brands and retailers to deliver an immersive, 3D experience. They provide photo-realistic images to help create a life-like visual of your home’s exterior and interior.

You can manage, review, and share your 3D images as well as create straight from your mobile or tablet using their app.

Chief Architect

This is an app-based software. It has great angles, is packed full of design features, and has an impressive stock of objects. It isn’t the easiest software to use and takes a little practice, but once mastered, it is a joy.

It’s no wonder it’s so popular. For less than $100, this design tool is excellent value, helping you create interiors, exteriors, individual rooms, and entire floors.

It lets you draw your home in CAD-style, choosing shapes and text boxes, and it even helps you select garden plants that attract bees and butterflies.

While the attention to detail is impressive, it does take practice learning how to use the software, but once mastered, it will prove invaluable.

One word of advice; choose the right compatible software for your Mac or PC.

FloorPlanner

Floorplanner is the brainchild of Google, allowing you to create 2D and 3D floor plans and designs. It is a staunch favorite of commercial companies and the real estate business.

Every item can be reshaped, resized, and rotated to give you a 360-degree angle. When you are done designing, you can easily share your masterpiece with friends and family to gauge opinions.

It comes in 3 options:

  • Basic, which is free.
  • Plus, which has a subscription.
  • Pro, which is the most comprehensive and expensive.

The basic option lets you create one free image only, unlike the paid versions.

HGTV Design Software

HGTV is a one-stop-shop of design ideas and know-how. This pay-TV channel is owned by Discovery Inc and is dedicated to home interiors and real estate.

Once you download the software, you are never far from innovative design ideas, which help take your home designs to the next level.

The channel is not limited to kitchen and home design; it gives you landscaping and home remodeling solutions as well.

We get that this is a paid service, but it is reasonably priced, and you are never short of ideas, thanks to the endless variety of the channel’s output.

Punch! Software

Punch! Software is a drag and drop option, making it relatively easy to master. You get landscaping options, kitchen designs, and exterior remodeling templates.

It is available for both Mac and PC, so make sure you know which one is which when downloading. It’s relatively inexpensive to purchase, with a broad scope of design options.

It allows you to try different designs and elements to see what works best for you, and it comes with a bonus pack, giving you even more choices.

FAQs

Is there an app for exterior home design?

There are many apps available for exterior home design. Apps give you the option of working remotely on a tablet or smartphone, so you can take your design skills anywhere.

What is the best free home design software?

It is a matter of opinion when deciding on the best. Some have better imaging than others, while you might prefer white-labeling so you can access the exact products and brands to build your new home.

Some let you design in 2D, while others give you landscaping options and 3D imaging.

How can I design my own house online for free?

Most of the free design software lets you draw your floor plan for free. Many have 3D planners that enhance the experience. Once you have your basic design, you can start to build.

It’s worth remembering that free online tools have limitations, with many charging for upgrades so you can access all the image and object libraries to complete your design.

How can I improve the outside of my house?

There are simple steps you can take to add impact to the outside of your house. Lanterns are a good choice, as well as arbors and hanging baskets. Adding a covered entrance creates an interesting visual while changing the door works too.

You could add a fence and gate, topiary, or change the sidings. Even changing the approach to the front door with gravel chippings or a fresh new flower border creates a better image.

Good Design Starts at Home

Building your dream home from the ground up in the virtual world is an excellent way to visualize what works and what doesn’t. You can see if the aesthetics are pleasing, whether your color choices suit the design, and what windows and doors look like.

Building a 3D model helps you iron out the wrinkles before committing to an architect and a contractor to turn the virtual into the actual.

Good luck, and get designing.

41 Best Online Antique Stores

If you’re looking for the best places to buy antiques from the comfort of your phone or computer, you’re in the right place.

We’ve rounded up the 41 best online antique stores for you to shop for vintage and antique pieces. No matter your interests or budget, you’re sure to find a website that sells what you need on this extensive list.

Where is the Best Place to Buy Antiques Online?

The top online store for antiques is Ruby Lane. But just because this site may have everything you need doesn’t mean you should skip the rest on our list. There’s plenty to see and lots of shopping to do.

1. Ruby Lane

Ruby Lane is one of the top sites to use for buying and selling antiques. This site has tons of categories, including:

This site is simple to use, with easy organization and search features. And with dozens of sellers, you’re sure to find reasonable pricing and anything from small, cheap knick-knacks up to rare antique pieces.

2. 1stDibs

1stDibs is another eCommerce antique store that specializes in selling authenticated antiques from licensed sellers. They deal in goods such as vintage fashion, art, jewelry, and contemporary artisan design.

This site has over 500,000 antiques listed from thousands of individual dealers around the globe. There are over 40,000 expert interior designers from over 50 countries and more European sellers than US-based.

All products sold and purchased on 1stDibs have certificates of validation and authenticity, so you know the products you buy are not fakes.

3. Chairish

Chairish is another online antique store with a mixed reputation. You can sign up to sell goods on Chairish without a business license, and they accept sellers from America and around the globe.

However, because there is less vetting that goes into becoming a seller on this site, it means many times customers receive damaged or incorrect goods.

You can buy multiple products from Chairish, including decor, rugs, lighting, outdoors, furniture, and art. They have a section just for new listings and even holiday guides.

4. MS Rau Antiques

MS Rau Antiques is the leader among international antique dealers specializing in rare goods. This family-owned and operated business opened in 1912.

If you’re near the French Quarter in New Orleans, Louisiana, you can pop into the 40,000 square foot brick and mortar gallery. Or browse their vast inventory through their eCommerce store.

There’s a wide selection of original paintings, sculptures, rare jewelry (Burma rubies, rare colored diamonds, and Kashmir sapphires) between the 16th and 21st centuries. You can find names like Paul Revere, Tiffany & Co., and Fabergé, as well as artists such as Rockwell, Brueghel, or Monet.

When you purchase an antique piece from M. S. Rau, you are guaranteed to receive an authentic item with official documentation.

5. Sotheby’s

Sotheby’s is the largest antique marketplace, established in 1744. This business operates in 40 countries with 44 separate departments. Among the goods available through this auction house are:

Sotheby’s sells antiques and helps patrons consign their goods to sell for the highest value. They hold more than 600 auctions a year and have a cross-inventory for immediate purchase through digital or physical shopping. They even host private sales.

You can attend live auctions at multiple locations, New York, Paris, Hong Kong, London, Doha, Beijing, Milan, Geneva, Paris, and Zürich.

A knowledgeable, bilingual staff helps ensure ownership, authentication, and assists you through the entire buying process. If you’re a novice, there are staff to provide guidance.

6. Rejuvenation

Rejuvenation is a seller of antiques and vintage pieces, but they also restore old pieces. This site is a gold mine for those interested in restoring historic homes.

They have antique hardware, lighting, home decor, bath and plumbing fixtures, bedroom and office furnishings, fans, rugs, and furniture. It’s your one-stop-shop for restored or replica antique pieces.

This site is more for interior decorating rather than a full antique shop. Most of the products they sell are home decor.

7. Modern Antiquarian

Modern Antiquarian is an antique shop that sells vintage and antique collectibles alongside contemporary pieces. This company aims to teach clients how to mix the old with the new for unique designs.

Shop Modern Antiquarian for rare antique pieces of furniture online or visit their brick and mortar stores at The Gallery located at 200 Lex, 10th floor of New York Design Center or The Antique and Artisan Gallery in Stamford, Connecticut.

8. Amazon

Amazon is a surprising site to shop for or sell antique goods. However, when shopping on this site, you deal with sellers who set their prices and list their objects.

There is no guarantee of these items’ authenticity, as any customer can sign up for a seller’s account.

Use caution when purchasing antiques off Amazon and consider having your pieces authenticated by a licensed antique specialist if there’s a concern of fraud or forgery.

9. TIAS Antiques

TIAS or The Internet Antiques Store is an online marketplace that sells collectibles and antiques. This site has been operating since 1995, based in Garden City, New York.

There are thousands of dealers and over 490,000 products up for sale from US and Canadian based markets. You can use this site to find odd novelty items and unique collectibles.

10. Etsy

It may seem surprising, but Etsy is a great site to shop for antiques. There are two categories to browse through for antique wares.

Navigate to the Arts & Collectibles tab to find vintage art, including paintings, sculptures, memorabilia, and fiber arts. The vintage category has classic jewelry, antique paintings, and old floor rugs.

11. eBay

eBay is a popular site to purchase goods through an auction or direct buy. It’s also a handy site that often features collectors selling antique and vintage goods.

You can shop eBay to look for collectible coins, vintage furniture, antique notes and books, artwork, and just about anything else you desire.

But this site does not restrict who can sign up for an account, so there’s no guarantee that the sellers are knowledgeable about antiques or that the pieces are authentic.

12. One Kings Lane

One Kings Lane, a sister company of Bed Bath & Beyond, offers high-quality furniture and interior design products, as well as a wide range of antique goods.

You can shop on One Kings Lane for vintage books, lighting, jewelry, accessories, textiles, and art. All products are authentic and validated by experienced professionals.

13. Jayson Home

Jayson Home is a home furnishing store that gives customers a unique shopping experience. When you visit them in-store, you might see live bands, grab a meal from the food trucks out front, or sip on champagne while browsing the goods.

While this store does sell antique and one of a kind pieces, they also have a wide variety of modern and contemporary designs. You’re sure to find everything you need for your room’s plan at this one shop.

14. Old Plank

Old Plank is a company with an obsession for antiques and vintage items. But they don’t just find and sell these pieces. They also produce identical replications, from no more than a photograph or a drawing.

Head to the website to browse the vast collection of antique furniture with influences from:

You can shop for seating, buffets, tables, cabinets, bookcases, wardrobe pieces, beds, kitchen islands and cabinets, rugs, lighting, mirrors, accessories, desks, and garden pieces. They have it all, and they can make what they don’t have on hand.

15. Everything But The House

EBTH – Everything But The House – started in 2008 by founders Brian Graves and Jacquie Denny, when they hosted an online auction for their first estate sale. They continue their practice of hosting estate sales almost twenty years later.

This site has a wide variety of vintage and antique items for sale for prices as low as $1. Whether you’re looking for vintage jewelry, homeware, furniture, or anything in between, EBTH is the shopping site to visit.  

16. Mid Century Mobler

Mid Century Mobler is a renowned furniture dealer specializing in the 1950s and 60s era furniture, crafted and imported from Europe and Scandinavia, including Italy, Scotland, France, Sweden, Norway, Germany, Denmark, and England.

In addition to a large online inventory, Mid Century Mobler has a large stocked showroom located in Berkeley, California.

You can shop for antique lighting, tables, seating, storage, and unrestored items. Or purchase a new piece designed and produced by MCM.

17. Pamono

Pamono is an online treasure trove of antique, vintage, and contemporary pieces collected worldwide.

New inventory is continually added, so it’s a site you want to bookmark and return to any time you have a shopping itch. Or sign up for the newsletter for inventory updates right to your email.

You can shop Pamono for unique accessories, furniture, and lighting from as far back as the late 19th century, plus some modern contemporary objects. Antique and vintage pieces are often unrestored and show signs of use, including patina.

18. Instagram

Since you’re already spending time on Insta scrolling through your peeps’ stories, why not do a little shopping too?

Many antiquities shops and dealers have gone digital and use their social media platforms, such as Instagram, to sell or auction antiques.

Of course, you want to use safe shopping practices, including making sure what you’re buying is legit. Arrange a meeting between you, the seller, and a hired third party to authenticate any pieces before you shell out money.

It’s hard to get a refund on fraud when the transaction occurs in such an unorthodox method. But you can improve your chances of hitting a big score by researching any dealers or businesses before continuing a transaction.

Listen to what your fellow Insta buyers are saying. If it sounds too good to be true, you should probably pass.

19. LAPADA’S online marketplace

LAPADA, or the Association of Art & Antiques Dealers, is a legit and well-known marketplace for all things antique. This organization opened its doors in 1974 and consists of over 550 members (antiques and art dealers) out of the UK. There are also 50+ members registered from other countries.

20. Auctionata

Auctionata is an auction house out of Berlin, Germany, that specializes in a variety of antique goods. They film live auctions in their on-site studio.

And they also have a large inventory of goods in their online catalog that’s open to the public. Licensed and trained auctioneers conduct all auctions, and the company has a policy that starts all auctions at low bids.

You can find various antiques for sale, from pocket watches, furniture, and vehicles.

21. AuctionMe

AuctionMe is a site similar to Auctionata. But it’s is a newer company launched in the UK. This auction house also employs trained and licensed auctioneers.

(Can’t find any more information on this site or a workable link. Google could not provide links, and all the articles referencing this site use a broken link.)

22. The Old Cinema

The Old Cinema is an infamous antique department store in London. This brick and mortar store opened its doors in 1979 and is included in the 100 best shops worldwide, as labeled by Retail Week.

When you visit the store, you can browse through the 10,000 square feet Edwardian palace separated into showrooms for various jewelers, decorators, designers, and antique dealers.

Now, if you can’t visit The Old Cinema in person, they also have a vast online inventory of furniture, accessories, lighting, and more.

Whether you’re an avid collector or just looking for a perfect piece to complete your room decor, there’s sure to be something for you at this online antique store.

23. Barneby’s

Barneby’s is a site you want to keep bookmarked, as it’s one of the easiest and most useful sites when shopping for antiques.

More than 2,000 auction houses and art galleries worldwide use Barneby to host their auctions and feature their products.

You can search Barneby’s website by seller name or product to find a specific collection. Or bid on any of the pieces featured during the open auctions. There are over 600,000 items currently up for sale or bidding.

24. LiveAuctioneers

LiveAuctioneers hosts over 50 million auction results from over 6,000 auction houses from over 47 countries worldwide. You can browse these sales to determine the value of your auction.  

If an auction happens in a country outside your native language, it automatically translates to your language of choice. Thousands of auctions occur each day, and you’re free to bid on any goods that catch your fancy, regardless of country.

Whether you’re looking for antique jewelry, art, decor, fashion, coins, collectibles, or Asian themed antiques, there’s a piece available on Live Auctioneers just waiting for you.

25. Circa Vintage

Circa Vintage is a specialty vintage shop that specializes in vintage clothing. With names like Dior, Pucci, Hermes, Chanel, Ossie Clark, Balenciaga, Versace, and YSL, there’s a vast selection of vintage styles.

This antique clothing store has been in operation for almost twenty years. It is the favorite vintage clothing boutique for stylists, celebrities, designers, and anyone interested in vintage clothing and jewelry.

26. Invaluable

Invaluable is an online antique store founded in 2009. This site hosts more than 160,000 auctions each year, featuring wares like Asain art, furniture, jewelry, and collectible antique pens.

This site receives over three million visitors, 4,000 sellers, and has an inventory of antique goods worth over $10 billion. View ongoing auctions or browse by category to find direct buy items.

27. Webstore

Whether you’re a buyer looking for antique collectibles or a seller trying to make some cash auctioning off your vintage wares, Webstore is one of the best sites to browse.

There are over 500,000 antique and vintage pieces up for auction on Webstore. Narrow your search by choosing from any of the 35 categories, or scope out more than 100,000 online auctions.

28. Artfire

Artfire is the perfect site to visit for finding vintage handmade jewelry and other collectibles in various categories. If you want to limit your search to only vintage items, there’s a box to check in the search panel.

Narrowing the search to only vintage items without any price tag filters produces more than 100 pages of results. Decorations, jewelry, and collectible items are all up for grabs.

29. Craigslist

Everyone knows that you can find some incredible items on Craigslist, including vintage pieces and antiques. Anyone can sign up and add posts to sell products.

Narrow your results to the antique category to filter through all the other goods offered on this site. You’ll find art, furniture, jewelry, coins, and all things in between within this category. But be aware that there are some shady people selling fakes. Be careful about what you purchase.

30. Bonanza

Bonanza isn’t as popular of an antique marketplace, but it has plenty of advantages over sites like Etsy or Amazon. This company deals in multiple categories, including some of the best antiques available.

You can browse through many souvenirs, collectibles, artwork, and antiques. And because many sellers are not professional antique dealers, you can often find rare and valuable pieces for much less than they are worth.

31. OLX

OLX, previously Dealfish, is an excellent online marketplace to find antiques and vintage pieces. And because it’s lesser-known, there isn’t as much competition for the unique pieces.

This site has millions of buyers and sellers from more than thirty countries around the globe, so there’s no telling what type of vintage pieces you’ll find listed.

32. Rehab Vintage Interiors

Rehab Vintage Interiors should be on your must-visit list for vintage furniture, ceramics, art, and antique glass pieces.

There’s a wide variety of funky vintage pieces and antique accessories, including lighting fixtures, car parts, and restored metal pieces.

33. Red Line Vintage

Red Line Vintage is a smaller, lesser-known antiquities store, with most of its business conducted through the Facebook page. As of current, they do not have a company website.

But they have tons to offer for industrial, vintage, and mid-century pieces, including art, portraits, furniture, and even robots.

34. Omerohome

Omerohome is a great go-to shop for the widest selection of antique and vintage products. You can find a wide range of furniture, sculptures, kitchenware, pottery, and other antique decorative pieces.

You could spend hours browsing this site’s offerings and not get bored. You’re sure to find everything you need for interior decorating or an avid antique and vintage collection.

35. Tara Shaw Antiques

Tara Shaw Antiques is the place to buy if you’re searching for authentic European antiques. This site is full of European furniture from past eras.

Not only do they sell priceless antiques, but you can also schedule a consultation with this company for decorating help.

36. The Good Mod

The Good Mod specializes in mid-century antiques, including lighting, accessories, and furniture, dating back pre-1950s. They also handle restorations, upholstery, and contemporary reproductions.

You can also shop at The Good Mod for fine art and other vintage pieces. If you want to visit in person, head to the 20,000 square foot loft in Portland, Oregon, to see their massive showroom and workshop.

37. Shopify

Shopify is an e-commerce solution that allows buyers to create an online store to sell their goods. Some of these stores deal exclusively in antique and vintage pieces.

You can shop on Shopify for various vintage pieces, including furniture, art, sculptures, collectibles, and everything else.

38. Antiques and Chatchkes

For all things vintage, head to Antiques and Chatchkes and browse the limitless wares. From furniture and vintage kitchenware to jewelry and lighting, you’re sure to find something that strikes your fancy.

In addition to selling antique pieces, this site also handles appraisals, estate sales and helping sellers get rid of their inventory.

39. Just Vintage Home

Just Vintage Home is another of the best online antique stores to find collectibles and vintage pieces. If you’re in the market for medieval (and pre/post) collectibles, this is the site for you.

You can purchase vintage items from the website, their Etsy page, or their brick and mortar store Angel’s Antique Mall, located in Opelika, Alabama.

40. Zibbet

Zibbet is a site that deals with handmade and small vintage pieces. You can find multiple vendors selling antique jewelry, accessories, and knick-knacks.

However, you’ll rarely find furniture or art listed. And anyone can sign up and sell goods, so there’s no guarantee on the authenticity of the pieces. If you’re a seller, you can set up a marketplace in a few easy steps.

41. Selency

Selency, established in 2014, is an online marketplace and community platform stocked full of vintage home decor, accessories, and Scandinavian mid-century modern furniture.

Each piece featured on Selency is verified for authenticity, seller, and origins, so you never have to worry about fake items. And there are over 100,000 pieces to choose from with constant restocks and new additions added daily.

Conclusion

We’ve provided you with forty-two of the best online antique stores where you can find authentic vintage pieces from large furniture down to small collectibles and jewelry. Each of these sites offers a wide range of antique goods, and many are open for those looking to sell their items. Happy shopping!

57 Different Types of Trees (Names & Custom Graphics)

Identifying different types of trees can help you improve your landscaping and make for smart conversation during social situations.

We’ve put together a guide to teach you about fifty-seven different types of trees. We provide the scientific name for each tree and define the physical characteristics to identify each kind by appearance quickly. We’ll also discuss where each tree grows.

The 57 Different Types of Trees (with Custom Graphics)

#1. Arborvitae (Thuja occidentalis )

Arborvitae is a coniferous evergreen tree that belongs to the cypress family and is primarily ornamental. Other names include eastern white cedar, swamp cedar, American arborvitae, eastern arborvitae, and northern white cedar.

This is a small to medium tree that grows 40 to 60 feet, although some can get up to 125 feet tall with a trunk diameter of three to six feet. It has a growth rate of eight to twelve inches a year until they’re 15′ tall, then growth slows.

These trees have red-brown bark that peels in long narrow strips. The leaves are yellow to green scaly needles that grow in flat sprays ⅛” to 3/16″ long. They form a conical or pyramidal shape.

They produce slender yellow-green seed cones ⅜” to 9/16″ long that darken to brown. Each cone holds eight seeds.

Origins

Arborvitae trees are native to North America. They do best in zones 2 through 7, including eastern Canada up to the Arctic treeline and throughout the northern US.

Some populations span further south, such as Massachusetts, Illinois, Ohio, or into the Appalachian Mountains.

#2. Banyan Tree (Ficus benghalensis)

Banyan Trees are the national tree of India and the largest tree in the world. These trees can live hundreds of years and can take up acres of land.

They start their life as a small seed that starts to grow once it lands on a suitable plant host. Over time, it suffocates the host tree and develops large reddish leaves that mature into a rich green color with a glossy look and a leathery feel.

The roots of Banyan trees grow into elaborate systems that resemble large separate tree trunks. One tree can have dozens of root offshoots that make the tree look like a complete forest.

When mature, this tree grows syconium – a large pitless fruit of the fig family. Many animals feed off these foods, spreading the seeds to new hosts that they quickly smother out.

Banyan trees classify as both deciduous and coniferous trees. They shed their leaves every fall, as most coniferous trees are apt to do. But the leaves do not change colors before shedding.

Origins

This tree species is native to subtropical and tropical climates, meaning it likes hot, humid weather. It was first discovered in India and is now seen in warm regions across the globe.

Common places where the banyan tree grows include:

This tree species can also flourish in tropical-like climates in the United States like Florida and Hawaii.

#3. Black Ash (Fraxinus nigra)

black ash tree

The Black Ash, or Fraxinus nigra, is a deciduous tree that thrives in waterlogged soil like swamps and flood plains.

These trees can reach 40 to 80 feet with a branch spread between 50 and 70 feet. The trunk is rarely more than two feet thick and doesn’t contain branches until high up.

This tree gets its name due to the bark’s dark gray color, which has a soft, corky texture and tends to develop fissures as it grows. It may appear flaky or scaly.

The leaves grow 8″ to 18″ in a pinnately compound opposite pattern. Each leaf has seven to thirteen stalkless ringlets that grow to three to five inches in length with fine-toothed margins.  

The flowers of this tree have no petals or noticeable appearance. In the winter, this tree grows brown velvet buds. It produces samara fruit, which has a winged pod.

Origins

You can spot Black Ash trees throughout northeastern Canada and many states in the northeast of the US. This tree is native to Iowa, where it’s the most prominent. Other locations where you can find Black Ash include the Great Lake states and:

#4. White Ash (Fraxinus Americana)

White Ash is a relative to Black Ash. However, they differ in leave color and growth location. These trees flourish in mesophytic hardwood areas near sugar maples.

White Ash trees, also called American Ash, can grow up to 50 to 80 feet with 40 feet to 50 feet branch span and a trunk width of two to three feet.

The bark has a yellow-brown to light gray color with furrows that create pointed ridges.

The compound leaves of White Ash have a metallic blue or gray color on the bottom. In the fall, they turn vibrant shades of yellow, purple, and red. These leaves grow 8″ to 15″ in length and have 5 to 9 leaflets that turn dark green.

This tree also produces 1″ to 2″ long samaras, a fruit with canoe-paddle shaped wings on each side. When these fruits fall from the tree, they create a neat visual as they seem to float.

Origins

White Ash trees are a native of North America. They grow throughout Nova Scotia, Canada down through the United States, including the states:

#5. Neem Tree (Azadirachta indica)

neem tree

Neem trees classify as both deciduous and coniferous. Common names include Indian Lilac, nim, margosa, or nimtrees. It’s a type of mahogany belonging to the Meliaceae family.

This tree type stays green year-long, although severe drought can cause a loss of leaves. Neem trees are tropical or subtropical species that need temperatures around 80℉ but never below 39℉.

Although drought resistant, these trees still need 800ml in annual rainfall to thrive. These trees can grow between 49 to 98 feet in height.

Neem trees have compound leaves with toothed leaflets. They produce small, white bisexual flowers with a pleasing fragrance and a yellow-green drupe fruit, which has a sweet pulp.

Origins

Neem trees do well in warm, humid areas, so they thrive in many places in South Asia. It is native to India but now grows in many places. Locations where neem trees flourish include:

You can also find these trees in some parts of Africa and Central and South America.

#6. Bigtooth Aspen (Populus grandidentata)

bigtooth aspen tree

Bigtooth aspens have many names, including Canadian poplar, large-tooth aspen, long-tooth aspen, or American aspen.

These deciduous trees can grow anywhere from 50 to 75 feet, with a diameter of 8″ to 10″. They have a lifespan of 50 to 100 years.

The most notable trait of bigfoot aspens is the uniquely shaped leaves. These leaves have sharp ridges along the ends that give this tree its name. When the tree is young, the leaves along the lower surface will be cotton-white. In the fall, the leaves turn golden-yellow.

These trees’ bark is thin and smooth with an olive green color that turns white, thickens, and develops grooves with age.

The wood from Bigtooth aspen has straight grains and a fine texture, making it ideal for ladders, log homes, chopsticks, and pallets.

Origins

Bigtooth aspens originated in eastern North America and are found in many states in the US, including:

These trees also grow in Canada, including British Columbia, Quebec, Ontario, Manitoba, Nova Scotia, New Brunswick, and Prince Edward Island.

#7. Quaking Aspen (Populus tremuloides)

quaking aspen tree

Quaking aspen trees have a high tolerance for cold weather. They grow up to 130 feet tall with a trunk diameter of 3 feet.

These deciduous trees are also known as trembling aspen, American aspen, trembling poplar, mountain or golden aspen, popple, and white poplar.

These trees have lightish green-gray colored smooth bark that becomes rough with porous tissue – lenticels – as the tree ages. They usually live to be 150 years old, although some can last longer than 200 years.

The glossy green leaves are round and smooth with toothed ridges on the edges. During the change of seasons, these leaves may turn golden or yellow. They rarely become red.

Quaking aspens have softwood that is light-weight, making it a good choice for matches and lumber. It’s also a popular component in the paper and pulp industries.

Origins

Quaking aspen trees are abundant in some of the coldest parts of Europe and Asia. These trees prefer high altitude and need plentiful supplies of sunlight and water.

Locations where you can find quaking aspens include:

These trees are also a common sight in North America, including Canada, central Mexico, and the US. It is Utah’s state tree and makes up most aspen parkland biome in Canada and northwest Minnesota.

These trees grow at higher elevations of 5,000 to 12,000. They are in the highest numbers in Colorado and Utah but also seen in other western states.

#8. Eastern Cottonwood (Populus deltoides)

eastern cottonwood tree

Eastern cottonwood trees are a deciduous species known for their foliage. This species is a relative of aspen trees and is among the fastest-growing and largest trees. Other names include the necklace poplar.

These trees can reach 56 to 195 feet, although some in history has grown to 100 feet. Their branch spread can span up to 113 feet, making them ideal for shade trees.

They have a growth rate of three feet a year and can live up to 150 years (depending on the species).

Cottonwood bark is smooth and silver-white during youth. Mature trees will have thick gray bark with deep fissures, which help protect the tree from fire and drought.

The leaves of cottonwood trees are large, dark glossy green, and have a triangular shape, a toothed edge, and a pointed tip. They grow alternate on flat stems that cause the leaves to dangle and clatter when the wind blows. In fall, the leaves turn yellow.

Cottonwoods get their name due to the seed pods, which are small fuzzy catkins that produce yellow (female) or red (male) flowers.

In the summer, these pods produce white fluff, which floats through the air. For many people, including this poor writer, this tree is a major pain in the A(llergies)!

Origins

Cottonwood trees are a native North American species found on numerous continents, including North America, Europe, and some areas in Asia.

In America, these trees grow across the country, including the central, eastern, and southwestern states. They also grow in southern Canada along the east coast and in the northeastern parts of Mexico.

#9. Mahogany (Swietenia mahagoni)

mahogany tree

Mahogany trees have many names, including Cuban mahogany, small-leaved, West-Indian mahogany, and American mahogany.

Mahogany trees classify as both deciduous and coniferous as they shed half their leaves in the cold months. When the foliage comes back in the spring, it will start with a pinkish-red color before turning light green and darkening with age.

This is a medium-sized tree that grows 98 to 115 feet tall with a 3 to 5-foot trunk. The branches can stretch 50 feet wide in a round, symmetrical spread.

It produces pinnate 4″ to 9″ leaves. Each leaf has four to eight shiny green 2″ leaflets with a lance shape.

The bark of young mahogany trees is gray and smooth but darkens and furrows as it ages. The darker the color, the older, and denser the wood.

These trees produce simple, unattractive flowers and fruits – silver oval capsules 3″ to 5″ long containing winged seeds.

Origins

Cuban mahogany is a species native to the Caribbean and southern Florida. This tree grows in the Bahamas, Jamaica, Cuba, and Hispaniola.

It also grows in Puerto Rico and the Virgin Islands due to importation over 250 years ago. Florida has this species on their “threatened” plant list, the Preservation of Native Flora of Florida Act. It’s also a protected wood in other locations.

#10. Basswood (Tilia americana)

basswood tree

Basswood trees, otherwise known as American Linden, American basswood, honey tree, or bee tree, are native to North America.

These trees can tower between 75 and 130 feet tall. When in full bloom, the branches create an oval canopy atop a straight trunk.

These trees produce aromatic yellow blooms that attract bees, which they use to make honey. They can grow between 50 and 80 feet tall. The crown of these trees can spread 35 to 50 feet.

The leaves can grow three to six inches long in an alternate pattern with a heart shape and an unequal base. The ridges are coarsely toothed. They turn light yellow or brown in the fall.

Dark red buds with a blunt point and light brown or gray twigs are other signature features of this tree. Younger trees have light or silvery gray bark. It darkens to dark gray or black with long medium furrows as they age.

Basswood grows a unique fruit, shaped like an open cluster of hard nuts that grow out of a narrow, elliptical wing.

Origins

The American basswood tree is native to Iowa. It’s now spread around southeastern Canada and most of the eastern US. You can spot these trees in every county in Iowa. Other states in the United States where basswood grows are:

It’s also in Canada, such as New Brunswick, Quebec, Ontario, and Manitoba’s southeastern corner.

#11. American Beech (Fagus grandifolia)

american beech tree

American Beech trees are deciduous slow-growing trees that do best in moist, well-drained acidic soil. These trees can grow from 65 to 114 feet tall, growing 12″ to 24″ a year. They can live two to three hundred years or more.

These trees are both decorative and ornamental, making great shade trees with a 40-foot canopy spread. Other names include White Beech, Ridge Beech, Beechnut Tree, and Red Beech.

The alternate, ovate leaves grow 3″ to 6″ in length and have sharp teeth on the edges. They have a dark green glossy color with prominent veins. The color changes to golden bronze in autumn. These leaves stay on the branches, even in winter.

Beech trees produce edible beechnuts, which are ½” to 1″ hard brown nuts with a three-sided triangular shape. They have low growing branches, a massive trunk with smooth silver-gray bark, and yellow-green flowers.  

Origins

American beech trees are native to Chicago, Illinois, making them a North American tree species. They also grew native in Texas, Florida, Massachusetts, Illinois, Indiana, Montana, and Ohio.

This species does well in moist or wet lowlands. It grows in some parts of Canada like New Brunswick, Nova Scotia, Prince Edward Island, Quebec, and Ontario.

It grows in multiple states in the US, especially in the southern states like Tennessee, Texas, Florida, Georgia, Arkansas, Kentucky, Mississippi, and Louisiana. Other states include:

#12. Tulip (Liriodendron tulipifera)

tulip tree

Tulip trees are deciduous and belong to the magnolia family. These giant trees can grow up to nearly 200 feet tall in their lifetime, making them one of the largest trees on our list.

Other names for the Tulip tree include Tulip Poplar, Tulip Magnolia, white poplar, whitewood, or Yellow Poplar, despite this tree not being part of the Poplar family.

This tree species produces 8″-10″ broad leaves with a unique four lobe design. In the spring, these trees blossom with 4″ to 6″ wide six-petalled flowers that can have green, yellow, or orange coloring and resembles Tulip flowers, hence the name.

During the fall, the Tulip tree leaves will turn a bright pale yellow then brown. Then they will fall from the tree.

When young, the Tulip tree will have a smooth gray bark with a greenish tint and long white lines. The bark will start to darken to a gray-brown with long vertical furrows around 15 years old.

Origins

The Tulip tree is native to eastern North America, initially growing in southern New York and Connecticut, southern Ontario, and northern Ohio.

Today, these trees grow in many locations, including Canada and the US. This species grows as far north as southern Ontario and southern Quebec.

In the US., you can find Tulip trees in many states, including Massachusetts, Rhode Island, and Illinois. It can also grow in most southern states like Louisiana, Kentucky, Tennessee, and Florida.

These trees thrive in the Southern Appalachian mountains but rarely grow wild west of the Mississippi River. But you may see a few used for ornamental purposes.

Early settlers of America shipped Tulip tree species to Great Britain in the mid-1600s (1688) to be planted at Fulham Palace. It’s now a common ornamental species used to decorate large gardens, streets, and parks.

#13. Black Birch (Betula lenta)

black birch tree

Black Birch trees are a medium-sized deciduous species found in North America. Other common names are cherry birch or sweet birch.

These trees can reach 115 feet in some areas. In the spring, the black birch sprouts green cones that darken to brown in late summer.

This tree’s leaves are 2″ to 4″ long with a dark, glossy green color. They also have single or double irregular serrations along the edge. In the fall, the leaves turn a vibrant golden yellow.

This species has hard, coarse-grained, heavy wood, with a dark brown color and yellow sapwood. When cut and exposed to air, the wood will darken to a color similar to mahogany.

Young trees will have reddish-brown or black bark with light lenticels. As the tree matures, the bark starts to darken to black and develop plates and scales.

The most common uses for Black birch trees are for fuel and furniture. The oil inside the twigs of a black birch can make medicine and flavorings, such as syrup.

Origins

The black birch is a native of eastern North America. The highest populations are in New York, Pennsylvania, Massachusetts, and Connecticut. They also grow in Canada, with many seen in southern Ontario.

Black Birch is a hardy tree that does well in various environments, including moderate droughts, winter conditions, and salt. They can grow from sea level up to 4,500 feet elevation, such as the considerable growth found in the Appalachian mountains’ southern part.

#14. Gray Birch (Betula populifolia)

gray birch tree

Otherwise known as white or poplar birch, Gray Birch trees are deciduous and native to North America. These trees can grow 65 to 98 feet tall with a 15″ diameter trunk.

They have 2″ to 3″ simple, alternate dark green, oval-shaped leaves with double serration and a long pointed leaf tip. These leaves turn yellow in fall. In the winter, they fall off.

Gray birch also produces 5″ to 8″ long catkins (erect – female; pendulous – male), which help this tree reproduce. In the fall, these fruits mature and contain multiple tiny winged seeds.

The bark of gray birch trees is smooth and thin with a reddish-brown color. The bark becomes chalky white as the tree ages, but it doesn’t peel the way black birch bark will.

The wood is a medium-hard with high oil content. Gray birch is used for furniture, spools, drum shells, plywood, and firewood.

Origins

Gray birch is a native tree to many Canadian provinces, including Ontario and Nova Scotia. It’s also common in the US, in states like Virginia, Pennsylvania, Indiana, New Jersey, and North Carolina.

#15. Paper Birch (Betula papyrifera)

paper birch tree

Paper birch, also referred to as white birch or canoe birch, is another common deciduous birch tree. This species is native to cold northern climates and does well in low temperatures.

These trees can grow 50 to 70 feet tall with a 35-foot wide trunk. They grow at a medium to fast growth rate of up to two feet a year and can survive up to 30 years in zones six and higher. For zones five and below, these trees can live over 100 years.

The bark of mature paper birch is easily identifiable due to the white peeling design with pink and black streaks. The inner bark is pink or salmon-colored. These trees may have reddish-brown bark with white lenticels until they mature around the age of five.

They produce clusters of dangling catkins in April to May, which are green or brown. If they are green and 1.5″ long, it’s a female flower. Male catkins are 2″ to 4″ long and brown.

Leaves of paper birch are 2″ to 4″ long, with a one-inch leaf stem. These double-toothed margined medium green leaves have an alternating leaf arrangement. They are smooth on the top with a veiny underside.

Origins

Paper birch trees are native to Alaska, Canada, and the northern states of the United States. These trees do best in zones 2-7 of the US, which are areas that receive the coldest winters.

Most provinces and territories in Canada, except for Nunavut, grow paper birch trees. You can sometimes see isolated growths in the Hudson Valley (New York, Pennsylvania, and Washington).

In high elevated mountains of New Mexico, Colorado, and North Carolina, paper birch can thrive. But it’s not seen further south.

#16. Yellow Birch (Betula alleghaniensis)

yellow birch tree

Yellow birch is another member of the birch family. Other names include swamp birch, gray birch, or silver birch.

These trees can reach heights of 60 to 75 feet with a 35 to 50-foot spread and a 2 to 3-foot wide trunk. Yellow birches grow at a medium rate of up to two feet a year.

These trees have bark that’s shiny yellow or gray-silver that peels and flakes in horizontal stripes. As the tree ages, the bark splits into curly strips and turns reddish-brown. Black streaks and dark lenticels are familiar sights in the tree bark.

Leaves of a yellow birch are oval, with a pointy tip and a cordate base, in an alternate pattern. These are 2″ to 5″ in length and half as wide, with a double serrated margin.

In spring, leaves have a dark green color that turns yellow in the fall. The color is darker on the top than on the pubescent veiny bottom.

Yellow birch trees produce male and female catkins. Males grow to be 2″ to 4″ that hang down and have a yellow, purple color. Female catkins are shorter (⅝” to 1 ⅛”), oval-shaped and grow up from spurs.  

Origins

These trees are native to Northeast North America. They populate much of Canada, including New Brunswick, Nova Scotia, Newfoundland, and Anticosti Island. They also grow in southern Ontario and southeastern Manitoba.

In the US., these trees spread from Minnesota to northeast Iowa, northern Illinois, New Jersey, New England, Pennsylvania, and Ohio. They grow in the Appalachian Mountains, eastern Tennessee, and northeast Georgia.

#17. Butternut (Juglans cinerea)

butternut tree

Butternut trees are deciduous trees that produce edible nuts. This tree belongs to the walnut family and is called the white walnut tree. This slow-growing tree can take one year to grow one foot.

These trees can grow to heights of 40 to 60 feet, although there are records of some trees growing over 100 feet tall. The bark of a butternut tree is gray and might be light. The trunk often grows crooked instead of straight.

They have an open crown with a 35 to 50-foot spread of compound leaves, which have a pleasing fragrance. These bright green leaves can grow to 15″ to 25″ in length with 11 to 19 serrated leaflets. In fall, the leaves change to yellow.

Although these trees produce small male and female flowers, they are not decorative. The flowers do not grow more than 3″ long with light coloring. Male flowers are pale green-yellow, while females are light yellow and contain the butternut fruit inside a husk.

The butternut is a 1 ½” to 2 ½” edible nut with a rich butter flavor. Typical uses are snacks, baking, or confections.

Origins

The butternut tree is a native species to the eastern US and southeast Canada, including southern Quebec and east New Brunswick.

Despite the origins, these trees have managed to travel from Minnesota as far into the south US as Georgia, Arkansas, and Alabama. They do best in zones 3-7.

#18. Black Walnut (Juglans nigra)

black walnut tree

The black walnut tree is at the top of the most valuable hardwoods in North America. It’s also one of the rarest hardwoods. It belongs to the walnut family and is heavily desired for its rich, heavy grain.

These deciduous trees grow 98 to 131 feet with a 50 to 75-foot spread. Black walnuts have a medium growth rate of 13″ to 24″ a year.

These trees produce an edible nut that can be difficult to get due to the three layers. The other layer is a greenish fleshy husk. Below that is a thick, hard black shell. The inside of the shell is the kernel, a sweet oily nut.

The leaves of these trees are alternate pinnately compound that grow to be 12″ to 24.” Each leaf has fifteen to twenty-three 2″ to 5″ dark green leaflets with fine-toothed ridges.

Origins

This tree is native to North America. It grows from southern Ontario down into the US from South Dakota to Georgia, northern Florida, and central Texas.

It also grows in many places in Africa and some parts of Europe. These trees prefer riparian conditions near rivers and streams.

#19. Black Cherry (Prunus serotina)

black cherry tree

Black cherry trees, often mistaken for a shrub (it belongs to the rose family – Rosaceae), are a medium-sized deciduous tree. Other names are wild cherry, black cherry, rum cherry, wild black cherry, and mountain black cherry.

These trees have a fast growth rate of 24″ to 36″ a year. They can grow up to 50 to 80 feet tall, with a crown spread of 30 to 50 feet and a two-foot trunk diameter.

These trees have a reddish-brown bark with white incisions to help the tree breathe. Older mature trees will be darker and rougher with scales that have upturned edges. The inner wood has an attractive red-brown tone, making it a desired wood for furniture.

The leaves are an oval shape, with a glossy dark green top and rust-colored hairs along the mid-vein and base on the bottom. They have a pointed tip and curved teeth along the edges.

Black cherry trees produce a dark red (almost black) drupe – a fleshy fruit containing one seed in the middle. These fruits ripen from late August to the end of September. Drupes are smaller and more bitter than the cherries you find in stores.

Origins

Black Cherry trees are dominant in only one forest in the US – black cherry-maple forests. The largest growths are in northern West Virginia, western Pennsylvania, eastern Ohio, and western New York.

They are native to every county in Iowa, except Sioux and Lyon. It grows through southeastern Canada and the eastern US.

Some populations exist in eastern and central Texas and the mountains in the southwest US, Mexico, and Guatemala.

#20. Pin Cherry (Prunus pensylvanica)

pin cherry tree

Pin cherries are a type of cherry tree that grows wild. Common names include Fire Cherries and Bird Cherries.

These trees can grow up to 30 feet tall with a straight narrow trunk and a rounded, flat crown. The trunk diameter can be between 4″ and 20.”

The bark is a smooth, shiny reddish-brown color with orange, white, or tan lenticels. As the tree ages, the bark may peel like thin pieces of paper.

Leaves of the pin cherry tree have a lance or oblong stape with fine teeth along the edges. These leaves turn bright red and orange during the fall. They have an alternate pattern and grow 1 1/2 “to 3” in length.

Pin cherry trees produce small white flowers in the spring. These grow in clumps with five to seven five-petaled flowers.

The fruit ripens in late summer to early fall. These ¼” cherries have a bright red color with a sour taste and a large stone in the middle. They grow on long stems in clusters.

Origins

Pin cherries are a common species throughout most of Canada, including Newfoundland, British Columbia, the southern Northwest Territories, and the southern Rocky Mountains and Colorado.

#21. American Chestnut (Castanea dentata)

american chestnut

The American Chestnut tree is a deciduous species that belong to the beech family. This hardwood is an endangered species in Canada and the US.

These trees once grew up to 98 feet tall with a 10-foot diameter. But due to a fatal blight disease in 1904, the majority of these trees died. What remains are newer growths that haven’t reached their full height potential. It is rare to almost impossible to find these trees growing in the wild.

These trees produce large leaves with wide saw teeth along the edges. These leaves can grow to be 5 ½” to 8″ in length and 3″ to 4″ wide.

As a monoecious species, chestnut trees produce small, light green (almost white) flowers (males) and 6″ to 8″ catkins, which houses the female parts at the base.

American chestnut trees also produce nuts, which grow in a cluster of three inside a green spiny burr, covered with tan velvet.

Origins

There used to be an estimated four billion American chestnut trees spread along the east coast of America. These giant trees stretched from Maine all the way south to Florida and Mississippi.

Now, there are less than 100 remaining large American chestnut trees. You can see some groves growing in Sherwood, Oregon, and Revelstoke, British Columbia. But most new growths will not survive more than ten years.

#22. Cucumber (Magnolia acuminata)

cucumber tree

The Cucumber tree is a member of the magnolia species and the most common of the eight variations. Other names are blue magnolia or cucumber magnolia.

These medium-sized deciduous trees grow up to 50 to 80 feet with a short straight trunk with a 2′ to 3′ diameter and a forty foot round spread. The growth rate is medium to fast, meaning 13″ to 25″ a year.

Cucumber magnolia trees have smooth bark when they are young that furrows with age. The color can be reddish or grayish brown.

The leaves are alternate oval or oblong with a length of 6″ to 10″ and a width of 6 to 12 cm. These leaves have smooth margins and a downy underside. They have an acuminate tip and a dark green color. In fall, these change to yellow and brown.

Flowers produced by this species of Magnolia are not ornamental. They are small in size with a yellow-green color that blooms between April and June.

These trees get their name from the small green unripe fruit, which resembles a little cucumber. As the fruit ripens, it turns a dark red to orange color. Each fruit contains ten to sixty bright red seeds.

Origins

The cucumber magnolia tree is native to the Appalachian belt, from New York, western Pennsylvania, and the Cumberland and Allegheny Plateaus. It is the only magnolia species native in Canada.

Numerous outlying populations occur throughout most of the southeast US, including Georgia, Florida, Louisiana, Illinois, Indiana, Missouri, Ohio, and Oklahoma. There are smaller populations found in the southern part of Ontario.

But the cucumber tree is on the endangered species list in Canada and protected by the Canadian Species at Risk Act.

#23. American Elm (Ulmus americana)

american elm tree

American Elm trees in the wild can grow up to 100 feet or more, but cultivated trees usually stop growing at 60 to 80 feet tall.

These trees have a thick columnar truck that splits into large branches and smaller branches that arch into a vase shape. The spread of an American Elm can span

The bark of these trees is a dark brown-gray color with deep ridges. When these trees are young, the bark will look scaly.

They have ovate-shaped alternating leaves with a double serration and straight veins. These are three to six inches long, with a dark green color that changes to brown or yellow in fall.

These trees produce tiny red flowers (petalless) on pendulous stalks that bloom in late winter before the leaves’ emergence.

The fruit from these trees is small, flat, and round, with a paper texture and a notch on the apex. These samaras hold a single green or yellow seed.

#24. English Elm (Ulmus minor ‘Atinia’)

american elm tree

The English Elm, also known as field elm, common elm, the horse may, and Atinian elm was once the most common elm in central southern England. It was also the quickest and largest growing deciduous tree growing in Europe.

These trees reach 98 to 130 feet tall with a trunk width of 50 feet. They have a quick growth rate of 36″ or more each year and a life expectancy of more than 150 years.

English Elms’ bark is dark with a grayish-brown coloring, a rough texture, and deep fissures. In older trees, the furrows create a block pattern. Suckers grow on the base, and fine hair grows on the twigs.

The leaves are 3″ to 6″ long in an alternate, ovate shape with a dark green color that changes to yellow, orange, or gold in the fall. These leaves have sharp edges, a rough top side and a pubescent underside, and an oblique base. They form a canopy spread of 50 feet.

These trees produce ½” to 1 ½” fruit – greenish-yellow rounded, winged samaras with a notch at the top in the spring.

As a monoecious tree, the English Elm produces small, dark pink to red flowers that hang down in tassels. These flowers contain both the male and female parts and bloom from February to March.

Origins

These trees are native to southern and western Europe, Britain, Asia Minor, and Iran. It can also grow in the Baltic islands (Gotland and Öland), although not naturally. They do best in USDA zones 5-8.

At one time, these trees grew abundantly in England. But a disease called Dutch elm wiped out over 20 million trees in the 1960s-1970s.

#25. Slippery Elm (Ulmus rubra)

slippery elm tree

Slippery Elm trees are medium-sized deciduous species also referred to as red elm. They have a life expectancy of up to 200 years. The inner bark of these trees is red, sweet, and fibrous.

These trees can grow 39′ to 62 feet, sometimes topping 98 feet tall with a trunk diameter of two to three feet. They can spread 49 feet and grow at a medium rate of two feet or less a year.

The bark of a Slippery Elm is brownish gray with deep furrows and layers of outer bark with a reddish-brown hue. The ridges of the bark lift higher on one edge than the other, which is a notable difference to American elm.

These trees have 5″ to 7″ oval leaves with an alternate pattern. These leaves have an oblique base, a double serrated margin, and a dark color on top with a pale color and white hairs on the bottom. They feel rough to the touch.

Slippery Elm trees produce ½” to ¾” flat-winged fruits that contain a single seed. These form in clusters in late May to early June. In the winter, ¼” dark brown buds grow long, rust-colored hairs.

Origins

The Slippery Elm is native to North Carolina and eastern North America. You can find these trees across the US, including North Dakota, Pennsylvania, Maine, Florida, and Texas. It also grows in southern Quebec.

#26. Balsam fir (Abies balsamea)

balsam fir tree

Balsam fir trees are a small to medium-size evergreen species that belongs to the pine family. Other names are Canada Balsam, Eastern Fir, Bracted Balsam Fir, and Canadian Balsam. It’s the provincial tree of New Brunswick, Canada.

These trees can grow to heights of 45 to 75 feet with a 20 to 25-foot symmetrical spire crown spread.

These trees produce ¾” long dark green flat needles in a spiral design. These needles grow on the branches individually rather than in bundles like Eastern White Pine trees. They are soft to the touch and have a pleasing aroma.

The bark of Balsam Fir trees is smooth, thin, and gray with resin blisters. As the tree ages, the bark breaks into brown scales.

These trees produce male and female cones that grow to 1 ½” to 3″ in length, with a purple to blueish brown color. These cones grow on the top branches and stand erect.

Origins

Balsam firs grow throughout northeastern America, including Canada and the US. You can see these trees from Labrador and Newfoundland to northern parts of Ontario and Quebec in Canada.

In the US, these trees grow from north Minnesota to Iowa, parts of Michigan and Wisconsin, New York, and Pennsylvania. They’re also a common sight in the New England States, including Connecticut.

#27. Hawthorn (Crataegus)

hawthorn tree

Hawthorn trees, also called quickthorn, thornapple, whitethorn, hawberry, or May-tree, is a small tree better classified as a shrub. It belongs to the Rosaceae family.

These shrubs have a height of 16 to 49 feet, trunk diameter of 8″ and a spread of 25 to 35 feet. Young trees have smooth gray bark that develops shallow fissures and ridges and darkens to brown with age.

Hawthorn trees produce clusters of 0.4″ white blooms in the late spring to early summer. They have a robust pleasing odor and produce berries that continue to grow through the winter.

The small pome berries start as green before riping to a dark red in the fall. Each berry contains one to three seeds that are not consumable due to containing cyanide, a type of poison harmful to humans.

They produce spirally arranged leaves with lobed or serrated margins. These grow on long shoots and in clusters of spur shoots. A signature feature of hawthorn bushes is sharp thorns that can grow up to 4.5″ long.

Origins

Hawthorn trees are native to North Africa, West Asia, and most of Europe and imported to North America and Australia. These trees do best in temperate areas of the Northern Hemisphere.

#28. Eastern Hemlock (Tsuga Canadensis)

eastern hemlock tree

Eastern Hemlock – also called eastern hemlock-spruce and Canadian hemlock – is a coniferous tree that belongs to the pine family.

These trees grow to 50 to 70 feet with a 20 to 30 feet conical crown spread. Trunk diameters can be up to four feet. The tallest tree reached 102 feet.

These trees have a slow growth rate of less than 12″ a year and an astonishing lifespan of up to 400 years. It can take 250 to 300 years for a tree to reach maturity. The oldest tree lived to be 554 years old in Tionesta, Pennsylvania.

Eastern hemlocks have a straight monopodial trunk with a four-foot diameter, covered in smooth gray-brown bark when young. As these trees age, the bark darkens to a cinnamon brown and develops deep fissures and scales.

Eastern Hemlocks produce short (less than 1″ long), flat needles with blunt tips and slightly toothed margins. These leaves are shiny green to a dull yellowish-green on top and a silvery bottom. They keep their color year-round.  

These trees start to produce female and male flowers around 15 years of age. From April to early June, the male flowers blossom in clusters of light-yellow flowers. The flowers develop scales and form a conelet.

Female flowers form into erect light green cones until pollinated; then, they begin to droop. The female cones turn brown and release seeds in fall.

Origins

The Eastern hemlock is native to the Appalachian and northeastern parts of North America. In Canada, these trees grow in Nova Scotia, New Brunswick, southern Ontario, and Quebec’s southern regions.

These trees can be seen as far south as Alabama or northern Georgia and as far west as Minnesota in the US. Outlying populations also exist in southern Michigan, southern Indiana, and western Ohio. You can also find random growths in the middle Atlantic states.

#29. Bitternut Hickory (Carya cordiformis)

bitternut hickory tree

Bitternut Hickory, also called swamp hickory or bitternut, is a type of pecan hickory that can live up to 200 years.

These trees grow up to 115 feet tall, although some may tower up to 154 feet. They have a three-foot diameter trunk and a spread of 40 to 50 feet at maturity.

These trees have light gray smooth bark with narrow ridges and yellow tint when young. As the tree matures, the bark turns scaly and granite gray with coarse ridges.

Bitternut hickories produce a 1″ medium-sized nut. This fruit has a thin, green husk covering a thin, brittle cream-colored shell and a bitter red kernel.  

Leaves are an alternate pattern, with a pinnately compound design 6″ 6o 12″ long. Each leaf has seven to nine yellow-green elliptical leaflets with toothed edges. These leaflets have a smooth top and a fuzzy pale underside.

These trees produce male and female flowers. Male flowers form in clusters of three hairy drooping catkins that grow 3″ to 4″ long. Female flowers grow as one or two small green flowers with spikes.

Origins

Bitternut hickory trees are native to North America, with some growth in Canada (southern Quebec and southern Ontario) and heavy populations in the eastern US.

These trees grow in Maine, Vermont, New Hampshire, Michigan, Texas, Minnesota, Florida, and Georgia. The most common sights are through southern New England, Iowa, southern Michigan, and Kentucky.

#30. Pignut Hickory (Carya glabra)

pignut hickory tree

Pignut hickories go by many names, including coast pignut history, sweet pignut, swamp hickory, smoothbark hickory, and broom hickory. This tree is a relative of the black walnut and the pecan tree.

These trees grow 80 to 135 feet with a two-foot diameter trunk and a spread of 25 to 35 feet. They have a lifespan of 200 years with a growth rate of two feet a year.

Pignut hickory leaves are alternate pinnately compound with five to seven inch long lance-shaped leaflets. These leaves have a dark yellow-green top with a pale glabrous underside. They have a rounded leaf base, a long pointed apex, and serrated edges. In fall, they turn golden yellow.

These trees have gray furrowed bark with narrow, interlacing ridges that grow scaly with maturity. They produce male flowers – three yellow-green hanging catkins on 2″ to 3″ stalks. Female flowers grow in clusters as 2″ to 5″ spikes.

The fruit from a Pignut Hickory grows to 1 ¼” long in a pear-shape. These nuts have a thin green unridged husk and, when opened, resembles a pig’s nose. The husk turns brown to black when ripe around September to October. The small seed has a sweet taste.

Origins

Pignut hickory trees are native to North America. These trees grow from Ontario, Canada, into Maine, south to central Florida, Alabama, Michigan, and Mississippi.

They are in most eastern US states, including Massachuttes, West Virginia, Kentucky, and North Carolina. The highest concentrations are in the lower Ohio River Basin, Ohio valley hill country, the Appalachian forests, and the Cumberland Mountains in Tennessee.

#31. Shagbark Hickory (Carya ovata)

shagbark hickory tree

Shagbark hickory trees are a common deciduous tree that belongs to the hickory family.

These trees grow 60 to 100 feet tall with an oval-shaped canopy spread of 40 feet. These trees grow at a slow rate of less than 12″ a year and have a lifespan of 200 to 300 years.

Young trees have smooth bark, while mature trees grow shaggy, light gray bark that curls up once they have a four to eight-foot diameter. Their bark is what gave these trees their name.

These trees have alternate compound leaves that grow up to 22″ in length. Each leaf has five to nine leaflets with finely toothed edges. The leaves have a yellow-green color that turns golden yellow in fall and shed.

The shagbark hickory nuts are round and grow to be 2″ due to the thick ridged husks, which resemble tiny green pumpkins. The husk darkens to brown and splits apart when ripe. The nut inside is edible with a yummy sweet flavor.

These trees produce hanging green male flower catkins on long stalks, and female flowers are short spikes that form into the fruit.

Origins

The Shagbark hickory is native to the Eastern United States and Kansas. But this tree rarely grows further than northern New England or Canada, except for an isolated growth in Lavant Township, Canada. It is almost non-existent in the southeast, Gulf coast plains, and lower Mississippi Delta.

#32. American Hophornbeam (Ostrya virginiana)

American Hophornbeam tree

The American Hophornbeam is a small understory deciduous tree with a slow growth rate. Other names include Eastern hop hornbeam, hop hornbeam, leverwood, ironwood hornbeam tree, and ironwood. It belongs to the birch family.

These trees only grow up to 20 to 35 feet tall, although some can reach 59 feet tall. They have an 8″ to 20″ diameter trunk and a pyramidal or rounded spread of 20 to 30 feet.

When young, the bark is a smooth reddish-brown with multiple horizontal lenticels. As the tree matures, the bark develops a gray-brown color and small shaggy plates and loose scales that peel and flake.

The 2″ to 5″ leaves are a simple ovoid-acute shape in an alternate pattern with double toothed edges and fuzzy stems. The tops are dark green, while the underside is paler and has sparse to moderate fuzz. In fall, the leaves turn from dark green to lemon yellow, red, or yellowish-brown.

These trees produce male and female flowers. The yellow-green male catkins grow ¾” to 2″ long in groups of three throughout winter. The female (pistillate), appearing in April, are 5/16″ to 19/32″ long spiky catkins with 10 to 30 flowers.  

Origins

This tree is native to North America, growing as far north as Cape Breton, Ontario, Nova Scotia, and Manitoba down to Minnesota, Wyoming, and further south to Florida and Texas. Some growths exist in Central America and Mexico as well.

#33. American Hornbeam (Carpinus caroliniana)

American Hornbeam

The American Hornbeam is another small understory hardwood tree, also called musclewood or blue-beech. They have a lifespan of 50 to 150 years.

These trees grow up to 20 to 50 feet with a slow growth rate of less than a foot a year. They have a canopy spread potential of 20 to 30 feet with a crooked or fluted trunk.  

The bark of American hornbeams is smooth with a grey-green color. As the tree ages, the bark develops shallow fissures and furrows and may turn dark gray.

The simple, alternate 2 ½” to 5″ leaves start growing as a purple-reddish color before they darken to green. In the fall, the color changes to yellow and orange-red. Features include a pointed tip and double serrated margins.

In spring, the male and female catkins bloom at the same time as the leaves. The appearance is unadorned and unnoticeable. These trees also produce clusters of involucres, each containing a single oval nut inside a three-lobed husk.

Origins

The American Hornbeam is native to eastern North America, including Canada and the US. In Canada, this tree grows in southeast Ontario and southwest Quebec. In the US, it grows in Maine, Minnesota, down to northern Florida and eastern Texas.

#34. American Larch (Larix laricina)

american larch tree

American Larches have many names, such as the tamarack, eastern larch, hackmatack, black larch, and red larch. This small to medium tree is both deciduous and coniferous and belongs to the pine family.

These trees can grow 33 to 66 feet tall with a spread of 50 feet and a 24″ trunk diameter. They have a fast growth rate of two feet or more per year with a life expectancy of 200 to 300 years.

They have tight, flaky pink bark that appears reddish underneath.

They also produce clusters of 10 to 20 ¾” to 1 ¼” short spiral needle leaves that start as a light greenish-blue color. In the fall, they turn bright yellow and fall off the limbs.

These trees also have ⅜” to ⅞” bright red cones covered with 12-35 seed scales. Once mature, the cone turns brown and opens to release the seeds.

Origins

This species is native to Canada, ranging from Inuvik and eastern Yukon, Newfoundland, and the Northwest Territories.

Some American larches also grow in the northeastern US from Minnesota to West Virginia, with an isolated population growing in central Alaska.

#35. European Larch (Larix decidua)

european larch tree

European Larches, or common larch, are both coniferous and deciduous and a pine family member.

These trees can grow from 70 to 100 feet in height with a trunk diameter of two feet. The conical crown can produce a 20 to 30-foot canopy spread. They have a medium growth rate of 12″ to 24″ each year and a lifespan of 200 years, although some can live up to 1,000 years.

The bark of young trees will be smooth and a greenish brown-gray color. As the tree matures, it grows deep furrows and scaly ridges; the color darks to a pinkish brown.

The common larch produces flat, soft ¾” to 1 ¼” slender needles that form in clusters. These needles are bright green in the spring and turn a dull yellow in fall before falling off.

They also produce ½” to ¾” spherical cones with a red or green color. As they mature, the color turns to brown. The cones open in fall to release small, winged seeds.

Origins

These trees are native to south and eastern Europe in zones 2-6. They are predominant in the Alps, Pyrennes, and the Carpathian Mountains. Some populations grow in southern Lithuania and northern Poland and naturalized in Scandinavia.

European larch can also grow in southern Canada and many states in the northeast US, including New Hampshire, Connecticut, Vermont, Maine, Michigan, Rhode Island, and New York.

#36. Black Locust (Robinia pseudoacacia)

black locust tree

The black locust, or false acacia, is a medium deciduous hardwood tree that belongs to the legume family. Its relatives are the bean and pea plants. Other names are yellow locust, white locust, green, locust, or post locust. This tree is an invasive species in some areas.  

Black locust trees can grow anywhere from 40 to 100 feet tall with a trunk diameter of two to four feet wide and a canopy spread of 20 to 35 feet. They have a lifespan of fewer than 100 years and a fast growth rate of two feet or more each year.

When young, these trees have smooth brown bark. The bark starts to thicken and develop furrows and scales as it ages to form diamond patterns. The color turns to reddish black or gray. There may be orange or red highlights in the grooves.

The dark bluish-green leaves are alternate pinnately compound and grow 6″ to 14″ long on a central 8″ to 12″ stalk. Each leaf has 7 to 19 one to two-inch leaflets. In the fall, these leaves turn clear pale yellow colors.

These trees produce attractive clusters of drooping white 4″ to 8″ flowers, which have a pleasant fragrance from May to June. These flowers contain both male and female organs.

Black locust trees also produce a flat, smooth legume fruit that’s 2″ to 4″ long and contains four to eight dark orangish-brown seeds.

Origins

This tree is a native of the eastern US. It grows in all of the lower 48 states, with the highest populations in the Appalachian Mountains (northern Georgia to Pennsylvania) and the Ouachita Mountains and Ozark Plateau (Missouri, Arkansas, Oklahoma).

These trees were also transported to other countries, including Australia, India, China, Pakistan, Europe, Canada, south and north Africa, New Zealand, the southern parts of South America, and some places in Asia.  

#37. Honey Locust (Gleditsia triacanthos)

honey locust tree

The honey locust – also called the thorny honeylocust or thorny locust – is another deciduous tree.

These trees have gray-brown, bronze, or red-brown bark, depending on the age. The bark starts as smooth with horizontal lenticels, which turn into narrow curling plates once the tree matures. You’ll also notice clusters of thorny branches along the trunk.

They produce elliptical or ovate shaped, pinnately, or bipinnately alternate compound leaves with a length of 5″ to 8.” Pinnate leaves have 15 to 30 leaflets, while bipinnately leaves will have only four to seven leaflets less than 1 ½” long. Leaves have a dark green color that turns to golden yellow in fall.

Honey locusts blossom with hanging clusters of narrow 2″ to 3″ small greenish-yellow flowers. These flowers are not showy but have a delightful aroma.

They also produce a flat fruit pod that may be leather or somewhat hairy with thick walls and tapered ends. They vary from green to a reddish or purple-brownish color and can also be dark brown or black. The size ranges from 6″ to 18″ and can contain 6 to 20 seeds and a sweet brown or light green pulp.

Origins

The honey locust is native to central North America, from Pennsylvania to Nebraska, east to west, and north to south from southern Minnesota down to south Louisiana. The highest numbers are in Indiana and southern Illinois.

#38. Red Maple (Acer rubrum)

red maple tree

Red Maple trees – also called soft, water, or swamp maple – are a medium-sized fast-growing tree that’s one of the most common deciduous North America species.

These trees can grow to heights of 40 to 90 feet with a one to two-foot trunk diameter. These trees produce a narrow oblong or rounded spread up to 40 feet. They have a growth rate of 13″ to 24″ a year and a lifespan of 80 to 100. Some may live up to 200 years.

Young trees have thin, smooth, light gray bark that darkens to dark gray with rough shallow fissures as the tree ages. The tree trunk is absent of tree limbs until midway up.

They produce simple, opposite 2″ to 4″ leaves with three-pointed lobes, shallow sinuses, and coarse, irregular serration edges. The leaves are light green on top in spring, with a paler glabrous underside with red or red-green petioles. Come autumn, they turn brilliant shades of yellow, red, and orange.

From March to April, these trees bloom with clusters of red flowers that form into samara fruit from May to June. The ⅝” to 1″ winged fruit can be red or green colored and turning tan at maturity from April to June.

Origins

The red maple tree is native to central and eastern North America and is the most abundant native tree on the continent’s east half.

These trees can grow in Canada and the US, from southeastern Manitoba, Ontario, Lake of the Woods, and eastern Newfoundland. In the US, these grow from Minnesota down to Florida and east Texas.

#39. Silver Maple (Acer saccharinum)

silver maple tree

Silver Maple trees – soft maple, swamp maple, creek maple, large maple, Silverleaf maple, white maple, water maple – are a deciduous maple species.

These trees can grow to heights of 49 to 82 feet, with some exceptions of 115 feet. They spread 36 to 49 feet and a fast growth rate of more than two feet a year. By the time a sapling is ten years old, they stand around 26 feet tall. They have a lifespan of 130 years or more.  

The bark of young trunks is smooth and a silvery gray. As the tree matures, the bark turns to a darker gray with a rougher, shaggy texture.

These trees have 3″ to 6″ leaves that have five lobes separated by narrow sinus cavities. These leaves have a green colored top side with a silvery shaded bottom. In the fall, they change to pale yellow.

In early spring, clusters of yellow, silver, and red flowers bloom before leaf growth. By late spring, these flowers turn into pairs of winged samara fruits that grow over 3″ long, making them the largest maple seed.

Origins

The Silver Maple tree is native to the central and eastern United States and some southeastern parts of Canada, including Ontario, southern Quebec, and New Brunswick.

It’s become one of the most popular trees seen in the US, growing in central Maine, northern Michigan, southeastern South Dakota, eastern Nebraska, Minnesota, Oklahoma, Kansas, Mississippi, Arkansas, Louisiana, Alabama, and Georgia.

However, it is not native to Florida or the Atlantic Coast. It also doesn’t grow at high elevations in the Appalachian mountains.

#40. Sugar Maple (Acer saccharum)

sugar maple tree

The Sugar Maple, also called birds-eye maple, rock maple, sugar tree, curly maple, sweet maple, and hard maple, is a flowering plant that belongs to the maple family.

These trees grow to heights of 80 to 115 feet with a crown spread of 40 to 50 feet and a trunk diameter of three feet. They have a 12″ to 24″ yearly growth rate and a life expectancy of 300 to 400 years.

The bark of young sugar maples is smooth gray-brown to light gray. As the tree matures, the bark darkens and develops deep furrows.

They develop long-petioled opposite blade leaves that grow up to 8″ long and wide with five lobes. In fall, these leaves become bright yellow, orange, or fluorescent red-orange. But they color unevenly, with some trees showing all the different shades at once while others change in certain areas.

These trees produce small greenish-yellow flowers in drooping clusters of 8 to 14 on long stalks. The flowers bloom into a pair of small samaras that fall to the ground in autumn.

Origins

The sugar maple is native to eastern Canada, including southern Ontario, Nova Scotia, south Quebec, southeastern Manitoba, and Lake of the Woods.

These trees are native to the northeast and the north-central US, from Maine to Minnesota, Missouri, Tennessee, and Virginia.

#41. Black Oak (Quercus velutina)

black oak tree

Black Oak trees are a medium-sized deciduous tree that belongs to the red oak family. Other names are quercitron, yellow oak, smoothbark oak, or yellowbark oak.

Black oaks can grow 60 to 150 feet in height with a straight trunk diameter of 24″ to 48″ and an open canopy spread of 85 feet. They have a growth rate of 24″ to 36″ a year with a lifespan of 100 to 200 years.

These trees have black, furrowed bark with deep, horizontal grooves that create a blocky pattern. The inner bark is yellow or orange. Gray patches adorn the limbs and twigs.

Leaves are alternate, simple with seven to nine deep incised lobes tipped with short, stiff hair. These leaves grow to 10″ long and 8″ wide with a dark green color on top and fine hairs on the underside.

Black oaks produce clusters of drooping yellow catkins (male flowers) 4″ to 6″ in length, and female flowers form in spiked clusters of one to four. The fruit of black oaks is a single or a bunch of two to five acorns.

Origins

The Black Oak tree is native to the midwest and eastern parts of the United States. These trees grow from the southwest parts of Maine, New York, Ontario, Iowa, Minnesota, Nebraska, central Oklahoma, eastern Texas, northwestern Florida, Georgia, and eastern Kansas.

#42. Chestnut Oak (Quercus Montana)

chestnut oak tree

Chestnut oak is a member of the white oak family and is also called rock oak. These trees can grow to heights of 60 to 70 feet with a 45-foot symmetrical round crown.  

They have a grayish-brown bark with massive ridges and scales. This tree has the thickest bark of all eastern North American oaks. The branches start as bronze-green, turn to reddish-brown, and finally darken to brown or dark gray.

They produce alternate 5″ to 9″ long broad obovate, lanceolate, wedge, or rounded leaves with 10 to 15 shallow rounded lobes on each margin. In spring and summer, they are a dark yellow-green color. By fall, they change to yellow, orange, and brown.

They also produce pale yellow, hairy male catkins 2″ to 3″ long and short, spiky female flowers that turn into a 1 ¼” long brown acorn with a sweet taste.

Origins

Chestnut oak trees are native to the eastern parts of the US. It is one of the most crucial ridgetop trees in the states from central Mississippi to southern Maine, including Tennessee, parts of Alabama, Georgia, and Kentucky. Outlying populations grow in south Michigan. It does best in zone 5A to 9A.

#43. Scarlet Oak (Quercus coccinea)

scarlet oak tree

Scarlet Oak trees are a medium to large deciduous tree that belongs to the red oak family.

Scarlet Oaks grow to heights of 60 to 80 feet with a canopy spread of 40 to 50 feet and a nine-foot trunk diameter. These trees grow at a medium rate of 12″ to 24″ a year and have a life cycle of 80 to 180 years.

These trees produce glossy green leaves that grow 4″ to 7″ long with seven lobes, topped with three to seven bristled teeth. In the fall, these leaves deepen to a bright scarlet, which gives this tree its name.

They produce 2″ to 4″ long slender yellow-green catkins and reddish-green female flowers that form small spikes. The flowers are non-ornamental and unimpressive.

They grow ovate acorns ½” to 1″ in size, inside a scaly cup. These nuts start green before maturing to a pale brown or red when ripe, which takes 18 months after pollination.

Origins

Scarlet oak trees are native to the central and eastern US. They grow from the southern parts of Maine over to Missouri, Michigan, and Wisconsin. And they go as far south as Georgia, Louisiana, and Alabama.

#44. White Oak (Quercus alba)

white oak tree

White Oak trees are deciduous hardwood, also called stave oak. Despite the name, these trees do not appear white. The name refers to the inner wood’s color, which is heavily desired for furniture and barrels to make whiskey and wine.

White oak trees can grow up to 50 to 80 feet with a 50′ to 80-foot canopy spread. They have a two to three-foot diameter trunk with an average growth of 12″ to 24″ a year. They can live up to 200 or 300 years.

These trees have a light ashy-gray bark that peels from the top, sides, and bottom. Halfway up the tree, the bark will form overlapping scales and shallow fissures. Early tree branches start as bright green before darkening to a reddish-green and then light gray.

The young leaves start as a silvery pink with thick down in the spring. They turn yellow-green within a few days and grow up to 5″ to 9″ long. Mature leaves will have a dark green glossy top that turns red, purple, or brown in the fall.

Flowers bloom in May with male flowers growing in fuzzy 2 ½” to 3″ yellow aments. Female flowers form as hairy reddish peduncles. They begin to produce ½” to 1″ acorns at 50 years, with amounts varying for each crop. These fall from the trees in October.

Origins

White oaks are native to central and eastern North America. They grow as far north as Quebec, Ontario, Minnesota, and southern Maine and as far south as eastern Texas and northern Florida.

#45. Eastern White Pine (Pinus strobes)

eastern white pine tree

The Eastern White Pine – also called northern white pine, soft pine, Weymouth pine, and white pine – is one of over 100 Pine species. It is coniferous, meaning it does not change color or lose its leaves in the winter. It stays a consistent green color.

Eastern White Pines can live to be 200 years old, although some have survived up to 450 years. These trees grow to heights of 80 to 110 feet with a three to five-foot trunk width and a canopy spread of 20 to 40 feet. They have a fast growth rate of two to three feet a year.  

These trees have 1″ to 2″ thick gray-brown bark with dark-tinted scaly plates and broad ridges. When young, the bark will be smooth and thin and may have a green hue.

They produce 2″ to 6″ slender and flexible, blue-green needles in bundles of three to five. These needles have fine serrations and three sides. An interesting fact is they only shed needles every one to four years.

These trees do not produce flowers but have small yellow cones (male) and 3″ to 8″ hanging female cones that take two to three years to mature and shed the seeds. White pines do not reach sexual maturity until 20 to 30 years and only reproduce once every three to five years.

Origins

Eastern white pine is a native plant of the eastern United States. It grows in Canada from Newfoundland, through the Great Lakes, and in southeastern Manitoba. In the US, it grows in Minnesota, throughout the Appalachian Mountains, and in some of northern Georgia.

Rare growth occurs at high elevations in northeast Alabama and classifies as a rare tree in Indiana. Seeds from this tree were exported to England in 1605. There, it is called the Weymouth pine.

#46. Pitch Pine (Pinus rigida)

pitch pine tree

Pitch pines, also called torch pines, are a small to medium evergreen (coniferous) species of the pine family.

Pitch pines are not a long-lived tree. They have a lifespan of 12 to 170 years, with most not living over 100 years. And they grow up to 40 to 70 feet, rarely topping 82 feet.

They have a slow to medium growth rate of fewer than two feet a year with a round or irregular crown spread of 30 to 50 feet. Once these trees reach maturity height, growth will slow to less than one foot a year.

They have a straight or curved trunk with a diameter of 1 to 3 feet. The outer tree has thick light brown rough bark covered with irregular plates and deep fissures.

These trees do not produce leaves but instead have stiff straight, or slightly curved needles that form in bundles of three. These have serrated margins with a dark green color. Newer needle growths will have a yellow tint.

They also do not produce flowers but do develop male and female cones. Male cones grow at the base of the year’s new growth along lower branches. Female cones are found on the upper branches and can take two years to mature after pollination. These cones store the winged seeds.

Origins

These trees are native to the northeastern US with small subsets in southern Quebec and Ontario, Canada, along the St Lawrence River’s shoreline.

This pioneer species grows as far west as Kentucky, as far south as northern Georgia, and up to central Maine. This area includes eastern Tennessee, western South Carolina, Virginia, southeast New Jersey, Cape Cod, Long Island, Pennsylvania, and southern Ohio.

#47. Red Pine (Pinus resinosa)

red pine tree

Red Pine, sometimes referred to as Norway pine,

Red Pines has a medium to fast growth rate of one to two feet a year with a height span of 66 to 115 feet. They form a conical or narrow round canopy with a spread of varying widths. These trees have a lifespan of 200 to 400 years.

These trees have a trunk diameter of three feet, covered by thick reddish-brown bark with flat, large plates that form a diamond pattern. Bark higher up near the crown gets thin, flaky, and has a bright reddish-orange color. There may also be red tints in the fissures. Young trees may have scaly orange-red bark.

Red pines produce dark yellowish-green needles that grow 4″ to 7″ long in pairs. These needles have serrated edges. These needles live up to five years before they fall off.

These trees start to produce reproductive seeds between 15 and 25 years old, with heavy production every three to seven years. The seeds come from the small 2″ to 3″ light brown cones, which grow alone or in pairs.

These cones may appear purple when first emerging. They darken to a nut-blue or dark brown and open when mature. The pine cones have a pointed tip on each scale.

Origins

Red Pine is native to North America. It grows from Manitoba to Newfoundland in Canada. You can find these trees as far south of Canada as Pennsylvania.

Small populations grow in West Virginia and Virginia in the Appalachian mountains. And a few remote areas exist in northern Illinois and northern New Jersey. This species covers more than 1.6 million acres throughout Michigan, making it the fourth most abundant tree.

#48. Scots Pine (Pinus sylvestris)

scots pine tree

The Scots Pine – also called Scotch pine, Baltic pine, and European red pine – is the national tree of Scotland and a popular coniferous species for Christmas trees. It was once called the Scots fir.

Scots Pine trees can grow to heights of 60 to 125 feet with a crown spread of 40 feet. These trees have a slow to medium growth rate of 12″ to 24″ a year. They can live 150 to 300 years, although some of the oldest Scots trees lived to be 760 years old.

This tree grows a long straight trunk with a three-foot diameter, covered by dark scaly bark near the base that lightens to rust-colored towards the tree’s top.

These trees produce twisted pairs of 1″ to 3″ blue-green needles that can sometimes lighten to yellow-green during winter. The needles shed every three years. They form in an alternating spiral and have a wonderful aroma and sharp tips.

These trees form 1″ to 3″ oval cones with diamond scales. When young, these cones have a pink or red color that darkens to gray-brown once pollinated. They form pine nuts once they’ve reached maturity.

Origins

This pine species is a native of Eurasia. These trees grow from Western Europe into Eastern Siberia. To the south, they grow as far as Anatolia and the Caucasus Mountains. They even grow in Fennoscandia inside the Arctic Circle.

These trees can survive up to 3,300 feet above sea level and at altitudes of 3,9000 to 8,500 feet. They grow in Russia, all of Eastern Europe, and some states in the United States in zones 3-7. The species is declining due to Pine Wilt, a fatal disease.

#49. Eastern Red Cedar (Juniperus virginiana)

eastern red cedar tree

Eastern Red Cedar – also known as red cedar, eastern juniper, pencil cedar, red juniper, aromatic cedar, and Virginian juniper – is a coniferous juniper tree species.

Eastern Red Cedar trees can grow to heights of 16 to 66 feet with a canopy spread of 12 to 15 feet. These trees grow at a slow rate of 12″ to 18″ a year. They have a life expectancy of 150 years.

These trees’ trunk is less than three feet in diameter and covered with reddish-brown fibrous bark that you can peel off in strips.

These trees produce two different types of leaves. Young leaves appear on plants less than three years old and mature trees in shady spots. These are short (1/16″ to 3/16″) and sharp. Adult leaves overlap in patterns of two or four in whorls of three or decussate pairs.

All of the leaves will be light green, but older leaves have whitish-silver accents. When old, leaves will turn brown and fall off, which can take multiple seasons.

These trees can be dioecious or monoecious. They produce small male cones that are yellow-brown and form in groups. Female cones have a light greenish-blue color and contain one to three seeds. The seeds are ¼” wide and ⅙” long with a sharp tip and a blue wax coating.

Origins

The Eastern redcedar grows in every state east of the Great Plains, from Canada down to Florida and west to Texas. It’s native to Kansas and Virginia. It grows best in zones 2-9.

These trees are commonly spotted growing in low mountains. Many areas consider this species to be invasive, even in places where it grows native.

#50. Sassafras (Sassafras albidum)

Sassafras tree

Sassafras, also called red, white, or silky sassafras, is a deciduous species with a strong history in Europe and North America for its various uses.

Sassafras trees grow at a medium/fast rate of 13″ to 24″ a year. They grow to heights of 49 to 66 feet tall with a spread of 39 feet and a trunk diameter of 24.”

These trees have thick, reddish-brown bark with deep furrows. The inner bark is red-orange, which you can see if you break off a piece of outer bark. Younger trees have smooth bark with a green tint.

Leaves on this tree grow alternate in an obovate or ovate shape to lengths of 4″ to 6″ and 2″ to 4″ widths. The leaves can grow in three distinct shapes, with all three types growing on the same limb. They can be three-lobed, two-lobed, or unlobed elliptical.

In spring, the leaves have a light green color, with some looking more yellow than green. In the fall, they change to yellow with red tints.

These trees produce flowers in the early spring before the leaves emerge. These yellow or green-yellow blooms can be 2″ in length.

Flowers with nine stamens means the tree is male. If there are six shortened stamens, it’s a female. You rarely see sassafras trees with both male and female flowers.

Sassafras trees also produce tiny bluish-black drupes, which contain a single seed. These grow on a red clubbed pedicel and ripe in the late summer.

Origins

Sassafras is native to eastern Asia and eastern North America. These trees grow from the southernmost areas of Ontario, Canada, throughout the eastern US, down to central Florida, west to East Texas, and southern Iowa.

These trees used to be abundant in southern Wisconsin but are now extirpated. They grow in many deciduous habits at altitudes below 5,000 feet above sea level.

#51. Shadbush (Amelanchier Canadensis)

Shadbush tre

The Shadbush tree has many other names, including wild-plum, sugarplum, juneberry, saskatoon, shadwood, shadblow, sarvisberry, Sarvis, serviceberry, and chuckley pear. There are over 30 species that belong to this genus.

These are small deciduous trees that grow to low heights of 15 to 25 feet and belong to the Rose family. They have a slow growth rate of less than one foot a year and a short life span of fewer than 50 years.

These trees have round, long leaves with fine-toothed edges. They form an alternate pattern. In fall, these leaves turn from bright green to bright yellow, orange, and red.

Between March and May, these trees blossom with clusters of five-petaled white flowers. These will last less than a week before they form into ¼” to ½” round reddish-purple fruit that turns black once ripened between June and July.

Origins

The Shadbush is a native tree of eastern North America. It has the highest concentration of growth in southeastern Canada and the northeast US.

Every state in the US except Hawaii is the native ground of one or more of this genus species, including 20 different types. Two of these species are native to Asia and one to Europe.

#52. Red Spruce (Picea rubens)

Red Spruce tree

The Red Spruce, also called West Virginia spruce, yellow spruce, hebalsam, and eastern spruce, is a coniferous member of the spruce family.

These trees can grow from 59 to 131 feet tall with a 24-inch diameter trunk and a conical crown spread. They can live up to 400 years with a growth rate of fewer than two feet a year.

These trees’ outer bark is thin grayish-brown or reddish with scales; inner wood is red-brown with narrow rings.

These trees grow yellow-green needles less than an inch in length, with four curved sides and a sharp point.

In May, they produce bright red pendant male flowers and erect bright green female flowers with purple tints.  

Origins

The Red Spruce tree is a native of eastern North America. It grows as far north in Canada as Nova Scotia and eastern Quebec.

It stretches throughout the Adirondack and Appalachian mountains, including New England, eastern Tennessee, eastern West Virginia, Pennsylvania, Massachusetts, New Jersey, and western North Carolina.

#53. White Spruce (Picea glauca)

white spruce tree

White Spruce is a member of the Pine family. It also goes by the name Canadian spruce, Porsild, western white spruce, Black Hills spruce, skunk spruce, cat spruce, and Alberta white spruce. This evergreen tree keeps color year-round.

White Spruce trees grow up to 40 to 60 feet tall with a 10 to 20-foot canopy spread. They have an average medium growth rate of 13″ to 24″ a year and a life expectancy of 100 to 250.

They have scaly bark that’s gray or silver and flakes off in 2″ to 4″ circles. Young trees have a conic spread, while older trees form a cylindrical shape.

They produce short diamond needles instead of leaves that have a blue-green top and a blue-whitish bottom.

These trees also produce 1 ¼” to 2 ¾” pendulous cones that are ⅝” wide when sealed and 1″ wide when opened. These appear red or green when young and darkening to pale brown between 4 and 8 months after being pollinated.

Origins

The white spruce is a native species to boreal forests in North America. These trees originally grew in Alaska and across Canada to Newfoundland and the Avalon Peninsula.

It grows throughout the northern border states of Minnesota, Michigan, Montana, Minnesota, New Hampshire, Vermont, and Maine. There are also isolated populations in Wyoming and South Dakota in the Black Hills.

#54. Sycamore (Platanus occidentalis)

sycamore tree

The Sycamore – also called the western plane, American planetree, water beech, buttonwood, and occidental plane -is the largest deciduous tree growing in the United States.

Sycamore trees can grow to heights of 70 to 100 feet with a spread of 65 to 80 feet with a moderate to fast rate of more than two feet each year. They have an impressive lifespan of 600 years.

These trees have an attractive looking dark red to brown bark with irregular mottled patches of brown, gray, yellow, and green-tinted white. The bark stretches, infills, and splits to accommodate the tree’s growth.

Many Sycamore trees have multiple secondary trunks. The way the limbs spread at the top forms an open, irregularly shaped crown.

They form alternate 4″ to 9″ leaves of various shapes with three to five lobes. These are pale green and covered with tomentum when first blooming. Mature leaves turn bright yellow on top with a pale bottom and brown in the fall.

They produce red male flowers and yellow female flowers that form into small brown burr fruit in May.

Origins

The Sycamore tree originated from the eastern and central United States, northeast Mexico, and Ontario’s extremely south areas. It might have originated in Ontario as well.

#55. Black Willow (Salix nigra)

black willow tree

Black Willow trees are a member of the willow family. These trees grow to heights of 30 to 60 feet with a 20″ to 30″ diameter single trunk and a spread of 73.”

Black Willow trees have thick black to dark brown bark with deep furrows. Some trees will fork near the base.

The leaves are 2″ to 6″ long and ¼” to ¾” thin with a shiny green top and a soft green bottom. They have serrated edges and a short stem. Leaves turn to lemon yellow in fall.

They produce green or yellow catkins that contain a red-brown capsule (fruit) that holds the fuzzy seeds.

Origins

These trees originated in the eastern United States and do best in areas with an average rainfall of at least 51″ a year. They grow from southern Ontario to New Brunswick in Mexico.

In the US, they stretch from the east coast west to Minnesota and some of Utah. They also grow down into Florida and Texas. And some growths appear in Mexico, west, and south of the Rio Grande.

#56. Eucalyptus (Eucalyptus)

Eucalyptus tree

Eucalyptus is a genus-species that includes over 700 types of flowering trees and shrubs belonging to the myrtle family. They are often called stringybark or gum trees.

The Eucalyptus tree can grow from 33 feet to 200 feet, depending on the type.

These trees have a unique feature that allows them to grow new bark every year as the outer layer dies. The dead bark can peel in flakes, ribbons, or large pieces and go by smooth bark. Other species will retain the dead bark along the lower half or at the base. These are blackbutts.

Most eucalyptus trees are evergreen, but a few species will lose their leaves every season. These leaves have oil glands and an alternate pattern with a glossy or waxy green color.

And most species will produce distinctive flowers and fruit gumnuts. The flowers can be white, yellow, cream, red, or pink with no petals. The fruit forms a cone with valves on each end to release the waxy, 1mm long yellow-brown seeds.

Origins

Eucalyptus trees are natives of Australia, and other islands, including Tasmania. Over ¾ of the forests in Australia are eucalypts, and each territory and state has specific species.

Some species also grow in California, although they are not native to the area. They were imported in the 1850s.

#57. Dogwood (Cornus florida)

dogwood tree

Flowering dogwood trees get their name from the attractive spring flowers. This tree is one of the most desired species in the southern US. Other names less frequently used include Indian arrowwood, white dogwood, white cornel, false boxwood, Florida dogwood, American dogwood, and Cornelian tree.

Dogwood trees can grow from 15 to 40 feet in height with a spread of 25 feet and a trunk diameter of 6″ to 12.” These trees grow at a rate of 13″ to 24″ a year. They have a lifespan of 80 years.

The leaves of flowering dogwood trees are opposite ovate with a 2″ to 5″ length and a very fine-toothed margin. The leaves are green in the spring and turn reddish-brown in the fall.

They produce white, pink, or yellow flowers in late winter to early spring before the leaves. These flowers form into scarlet red or pink drupe fruits in clusters of two to ten.

Origins

The flowering dogwood tree is native to northern Mexico (Veracruz) and eastern and southern states in North America.

These trees spanned from coastal Maine down to northern Florida and as far west as the Mississippi River.

Deciduous Trees vs. Coniferous Trees

We classify trees into two categories – deciduous and coniferous. When a tree falls into a category, it will share similar traits with other tree species of the same class.

Coniferous

Coniferous trees classify as evergreens. These trees keep their green color throughout the year. Unlike deciduous trees, the leaves of coniferous trees will not change colors or shed annually.

When Coniferous trees lose their leaves, it is a sign of an environmental issue. You may want to do some research to figure out the problem causing the stripped tree.

Deciduous

Deciduous refers to hardwood trees. This category of trees have leaves that change colors and shed annually or seasonally.

During the fall or when cold weather begins, the leaves will darken and fall off. The limbs will be bare during the winter. As spring rolls around, the trees will grow new leaves that will age and fall off at the end of the year.

How To Identify the Types of Tree Leaves

Many times, you can identify the type of tree by examining the leaves. Here are a few ways you can determine the kind of tree leaves.

First, determine if the leaf is a broadleaf, scale, or a needle. Most broadleaf trees are deciduous, while trees with needles and scales are more often coniferous.

The leaf’s shape can also help identify the type. The different shapes include:

You can also look at the tree’s bark color. Some trees have specific colored bark such as birch, which has pure white bark, beech has silver, mulberry is cinnamon-colored, paperbark maple has a copper color, and aspens have greenish-white.

Conclusion

We hope we’ve helped you understand the different types of trees and how to tell these species apart. We’ve given you 57 common tree species and described their characteristics. We’ve also provided helpful pictures so you can be a tree identifier in no time.

27 Best Online Kitchen Design Software Options (Free & Paid)

When designing your new kitchen, you could pay a professional to draw up some unique ideas and styles. But that seems just a little bit “last century” when it comes to remodeling your space.

Embrace the latest technology and build your kitchen in the virtual world, using kitchen design software to save you time and money. What could be better than immersing yourself in a 3D design, placing you inside the room to get a clear idea of how it looks.

Kitchen design software gives you a detailed view of your kitchen and allows you to try out different layouts to see what fits and what doesn’t. Some are more basic than others, while advanced software gives you 3D imaging.

Let’s take a tour of the best online kitchen design software options to see what they have to offer.

Table of Contents

Why Use a Kitchen Design Software Tool?

Refitting a kitchen isn’t that much fun, but designing one is. Kitchen design software is the best way to visualize the ideas rolling around inside your head. Imagine seeing the fruits of your ideas in 3D, immersing you into the room before it is physically created.

If you are hiring a bespoke kitchen fitter, providing the most detailed plans helps them work accurately and to a schedule. It also removes any “gray area,” eliminating possible disagreements or disputes later down the line.

You could still employ a designer’s services, but if you present them with your clear designs and ideas, it could save you money in the long run by making the planning stages easier.

You also get a chance to see what works and what doesn’t. What seems like a great idea may not be that appealing in reality, and kitchen design software helps you iron out these problems before committing hard-earned cash to the project.

Plus, it helps you budget, as you install the elements of your dream kitchen virtually, keeping an inventory of what you need and basic costs.

Another advantage of using kitchen design software is the white-labeling element. Many free to use packages are a tool to advertise products from manufacturers linked to the software.

While some might not see this as ideal, other people like the idea that they can design their kitchen and plan and purchase the exact products to match their design.

Types of Kitchen Planners

There are two ways to approach kitchen design software; free and paid options. Both have their advantages and disadvantages.

Free to use products clutter their software with advertising and product placement, while pay to use packages charge extra to unlock new designs.

First, let’s take a look in detail at the pros and cons of free to use design software.

Best Free Kitchen Design Software Options

1. Backsplash and Cabinet Design Software

Screen Shot 2020 12 16 at 2.14.40 PM

Image credit to Backsplash.

This type of software is very specific. It focuses on your cabinet and backsplash designs, as the name suggests. It allows you to check color coordination, patterns, and configurations for free.

It’s the ideal way to test combinations or splashback designs against types of cabinets and work surfaces. Getting the chance to see your design as it takes shape means you can change what doesn’t work.

Maybe color clashes that seem less evident on paper are front and center on a kitchen design template.  

2. Sketchup

Sketchup is one of the easiest software packages to master. It is a basic version of Sketchup Pro, developed by Google. In 2012, it was acquired by Trimble Navigation and has since become a firm favorite with homeowners and remodelers alike.

Sketchup has a celebrity fan base, with Ana White, the woodworking guru, using it to create her award-winning furniture designs.

Many of the 3D templates are uploaded by fellow designers, but you still have the freedom to adapt and update the layout to suit your tastes.

Sketchup allows you to upload JPG, PNG, and SKP files, and the entry-level comes with 10GB of iCloud storage. Students can take advantage of lower fees if they select the paid version.

3. IKEA 3D Home Planner

Screen Shot 2020 12 16 at 2.16.27 PM

Image credit to Ikea.

When this software was initially developed, it was a tool to design IKEA kitchens only, but it has since incorporated complete home design. For this reason, it is a strong contender for designing cabinets and layouts.

This free design tool is heavily geared towards retail sponsorship, so if you don’t want to be deluged with dedicated IKEA kitchens and associated products, this might not be the tool for you. If you can see past this, it is still a great tool to use for your kitchen ideas.

This web-based software allows you to start designing without setting up an account, unlike some other software. However, it is advisable to set up an account for the best user experience, especially if you want to save your designs.

4. Planner 5D

Screen Shot 2020 12 16 at 2.17.13 PM

Image credit to Planner5D.

If you want photo-realism, Planner 5D lets you create realistic images of your kitchen, as well as offering 3,000 elements to give you a vast choice.

It works on Android and iPhone devices and is the perfect tool for designing other rooms inside your home. This app has a 2D mode as well, but beware because your kitchen design options can be limited.

Plus, some of the elements are not free, so you might not get the full benefits of the software unless you opt to pay.

What it does well is it teaches you how to plan a kitchen, giving you hints and tips. For those lacking any direction, this might be the software to get.

5. Home Hardware Kitchen Design Software

Screen Shot 2020 12 16 at 2.18.29 PM

Image credit to HomeHardware.

This software is available as web-based software, so you don’t need to download anything. It has several preselected kitchen designs that you can download and use, but you can also start from scratch with your own ideas.

This tool immerses you into the layout, giving you a realistic feel for what works and what doesn’t.

6. Lowe’s Virtual Kitchen Designer

Screen Shot 2020 12 16 at 2.19.51 PM

Image credit to Lowes.

Lowe’s software is very similar to the Home Hardware option. It has remarkable imaging, enabling you to render realistic designs of your kitchen.

It supports 3D design, and you even have the option of zooming into the virtual kitchen to check the smallest details. The only downside is it can be slow, making the experience a bit labored.

7. Roomstyler

Screen Shot 2020 12 16 at 2.21.32 PM

Image credit to Roomstyler.

Roomstyler is another easy-to-use 3D option that allows you to create detailed designs without the clunkiness of the Lowe’s software. Roomstyler is also fast and efficient.

You don’t even need to choose a layout to get started, unlike other software. Choose the kitchen module, and you can begin designing. It also lets you place appliances and crockery.

One exciting feature of this software package is you can upload your final designs to Facebook to share with the world and gauge opinions.

On the downside, the images lack the quality of some design tools, and it does take a little practice to master.

8. Prodboard

Screen Shot 2020 12 16 at 2.24.51 PM

Image credit to Prodboard.

Prodboard is Ukrainian, so when you load your design, you might see Russian on the screen. Don’t panic! Simply click the translate button, and you can read it in English.

This online option is linked to furniture makers and home-related stores, so you might find your choices limited.

It has a crispness and clarity, making the 3D design easy to visualize.

9. Homestyler

Screen Shot 2020 12 16 at 2.32.15 PM

Image credit to Homestyler.

Homestyler is another online design tool that lets you input your own kitchen layout or choose from their preselected templates. It has 3D clarity, and you can choose from a range of options such as cabinets, sinks, and appliances.

It also comes as a handy mobile version, increasing your convenience. Imagine designing your new kitchen on your smartphone without losing the quality of the images.

10. RoomToDo SoftwareScreen Shot 2020 12 16 at 2.33.44 PM

Image credit to RoomToDo.

RoomToDo is a favorite of professional designers and real estate agents, so it should serve you well. If it works for them, it’s going to work for you.

It is a whole-home design tool, so once you’ve finished with the kitchen, you can get started by planning another room.

RoomToDo has a vast list of design choices, which you can access by clicking the option on the right of the design page. This 3D software is user-friendly and available in a mobile version for increased convenience.

11. Planning Wiz

Screen Shot 2020 12 16 at 2.34.22 PM

Image credit to Planning Wiz.

It’s always a great idea to draw out your design first using a floor planner. You can then start to build your perfect kitchen using this user-friendly tool.

Once you have your basic design, Planning Wiz allows you to select elements like cabinets and appliances, adjusting them to scale to fit your layout. You can even upload PDF and background images with the blueprint sketch.

It also lets you choose the room decor, seeing what compliments the elements you have chosen. And because it’s interactive, you can change it if you don’t like what you see.

12. Caesarstone’s Kitchen Visualizer

Screen Shot 2020 12 16 at 2.36.52 PM

Image credit to Caesarstone.

This Kitchen Visualizer is design software for the entire home or commercial premises. It is simple to use, making it a dream for beginners.

All you need to do is click the kitchen area you want to design, and the kitchen elements fill the screen automatically. Also, you can scroll through multiple splashbacks by clicking the splashback button.

You can easily play about with colors and designs, comparing worktops, cabinets, and materials at a glance. It even lets you select the flooring to complement the design.

13. Formica “Design A Room”

Screen Shot 2020 12 16 at 2.38.19 PM

Image credit to Formica.

This software allows you to upload your kitchen photos or use their preselected images. You can compare colors and materials while creating your design by placing the mouse over that option.

This software is more nuanced than other versions, letting you build your creative skills. You can design objects like backsplashes, cabinets, shelving, and flooring.  

14. Floors And Kitchens Today Virtual Room Designer

If you want kitchen design software similar to Ceasarstone’s, then this Floors and Kitchens Today virtual designer will suit your needs. It works by clicking an area of the kitchen that opens up design options.

You can chop and change the styles and designs to suit your tastes, and to kick-off, you get several starter kitchens to match countertops, flooring, cabinets, and backsplashes.

15. Colonial Kitchen Visualizer

Screen Shot 2020 12 16 at 2.41.47 PM

Image credit to Colonial Marble.

If you lack the time or the inclination to come up with your own design, this online software gives you preselected templates for the best layouts and color schemes that you can tweak to your heart’s content.

Select your chosen design and get to work customizing the cabinets, worktops, and even the appliances.

16. Floor Planner

Screen Shot 2020 12 16 at 2.46.12 PM

Image credit to Floor Planner.

Floor Planner is an excellent software package, but it limits you to one free design only. If you want increased choices, you need to pay a fee.

Also, while it is a useful tool, if you want 3D images, it might be best to consider other software tools. It does allow you to draw in 2D and view the results in 3D, but you would need the paid service to do that.  

17. Southern Stone Surfaces Visualizer

Like other similar design software, Southern Stone Surfaces Visualizer allows you to create designs that include the countertops, floors, walls, cabinetry, and backsplashes.

You can design contemporary and classy kitchens using materials like graphite, marble, and quartz.

18. WilsonArt

Screen Shot 2020 12 16 at 2.48.36 PM

Image credit to WilsonArt.

WilsonArt has developed this design software to complement its range of composite materials like laminates and furniture.

It allows you to customize your design using cabinets, backsplashes, and walls.

19. Houzz Home Design & Remodel App

Screen Shot 2020 12 16 at 2.49.30 PM

Image credit to Houzz on Google Play.

Houzz Home Design and Remodel App won a New York Times award for one of the best home improvement and design tools. So, this one is worth checking out!

You can find this app in the Google Play Store or the Apple Store for iPhones. Once installed, you can open the templates and even layer images of your kitchen, adding cabinets, sinks, and appliances to see how it looks.

However, this software is not as user-friendly as some design packages, so you might find it challenging to navigate.

20. Renuit Kitchen Design Software

Screen Shot 2020 12 16 at 2.50.33 PM

Image credit to Renuit.

Like many other software packages, this one allows you you use preselected layouts to get an idea of how your kitchen will look. It lets you choose the cabinets, backsplashes, and appliances.

Simply select the kitchen layout, then pick the cupboards and doors from their size list, and start adding.

Advantages of Free To Use Kitchen Planners

Disadvantages of Free To Use Kitchen Planners

Best Paid Kitchen Design Software Options

21. Chief Architect – Home Designer Suite

The popularity of Chief Architect software is undisputed. It is robust, highly detailed, and it gives you multiple options for kitchen designs. It also helps you design the entire house.

If you want to spend less than $100, this is the best design software for value for money. You can create designs on a room by room basis, building entire floors.

The attention to detail is second to none, although mastering it takes a little practice. Once you get used to it, it will prove to be invaluable.

One word of advice; choose the right compatible software for your Mac or PC.

22. SmartDraw

SmartDraw has been around since the mid-90s and has been updated and improved with each new version. It is so popular; it is a design stalwart of public and private sector institutions, as well as some Fortune 500 companies.

Thanks to its professional fan base, designers and programmers have contributed to many of the kitchen layouts, supplying unique designs for you to access.

You get the choice of over 70 types of visuals, including graphs, charts, and schematics. The only downside to this software is the price. It can seem expensive compared to other similar packages.

The upside to paying for this software is it is free of affiliate links to products and items frequently peddled on free to use packages. For this reason, it is uncluttered and user-friendly, once you get the hang of it.

There is a free version if you click the “Try it for free” trial button, but if you want to access the 4,500 templates and over 34,000 symbols and images, you need to subscribe and pay monthly.

It could benefit from online tutorials and hints and tips for those new to this software desperate to ask questions because mastering it takes trial and error.

23. ProKitchen Software

ProKitchen allows you to really get into the details. It has templates and visuals that include products from over 300 manufacturers.

You can visualize how your kitchen looks with the appliances in situ before you commit to purchasing your kitchen for real.

You get a real sense of how the kitchen will look with the exact placement of all your appliances, sinks, backsplashes and even colors on the walls. This software is also compatible with PCs and Macs.

24. 2020 Kitchen Design Software

This software is impressive because it lets you create and tour 3D designs using a 360-degree view. Couple this with the brilliant images that take on a lifelike feel, and you get an immersive format that makes an impact.

This software is widely used in the professional design world, but it is also a favorite with homeowners. To purchase, you must first download a 30-day free trial before committing to the premium subscription price.

25. HGTV Kitchen Design Software

HGTV is a pay-TV channel owned by Discovery Inc and dedicated to home interiors and real estate. Thanks to the channel’s output, once you download the software, you are never far from innovative design ideas. This just takes it to the next level.

And the channel is not just limited to kitchen and home design; it gives you landscaping and home remodeling solutions as well.

While it is a premium service, it isn’t too costly, and once downloaded, you get a continuous stream of fresh ideas.

26. Punch! Software Home Design Studio

This software is available for both Mac and PC. It’s relatively inexpensive to purchase and simple to master. It also has a broad scope of design options.

It allows you to try different designs and elements to see what works best for you, and it comes with a bonus pack, giving you even more kitchen choices.

27. Space Designer 3D

Space Designer 3D is a photorealistic design tool that gives realistic and accurate representations of your kitchen.

To use the software, open it in your web browser, create an account, and start designing. It allows you to see your designs in startling clarity and immersive 3D.

The products included in this package are white-labeled by other companies, but you are under no obligation to purchase any products.

Advantages of Paid Kitchen Planners

Disadvantages of Paid Kitchen Planners

Science Fiction For the Perfect Kitchen

Kitchen design software is such a useful tool in creating warm and inviting spaces within our homes. The kitchen is the heart of any property and deserves the extra attention to detail that 21st-century design tools deliver.

There are so many software packages available that choosing the right one can be a challenge; however, it is worth the effort if you want the best designs.

So, if you want the kitchen of the future, break with tradition and download the latest technology. It could be a smart investment.